QTS-17171X-SPF0000 - ACI
Automation Field Components
Expl Proof Sensor, Hydrogen, 0-100% LEL, 3-wire 4-20mA Output, Insustrial NEMA 4X, S.S. sensor housing, Remote Cal Adapter, Sensor Guard
This item is temporarily out of stock.
It can be backordered right now, and we can ship it within 5 weeks.
0
130149
ACI
U.S.A.
{{CMP.TITLE}}
- Features
- Comments (0)
-
Data Sheet
QTS-17171X-SPF0000 - ACI
Automation Field Components
download pdfPlease contact us if you need any other document this item may have.
You can only download Technical Document (Datasheet) on this section.
The QTS-1710 Series utilizes a standard pellistor bead technology for the measurement of combustible gases. The sensor is resistant to poisoning substances such as Silicones, Sulphur and Chlorinated compounds. The Sensor is mounted to an explosion-proof housing while the transmitter provides a 3-wire, linear 4 to 20 mA output signal that is proportional to the LEL (Lower Explosive Limit) of the calibrated combustible gas. Test jacks are provided to monitor the transmitter signal without having to interrupt the output signal and Zero and Span adjustments allow for eld calibration. Calibration and bump testing should be completed every three months in all combustible or explosive atmospheres. Calibration gases and 0.5 liter/minute gas regulators are not available through ACI. These should be purchased through your local gas supply company or companies such as Portagas® (Praxair®, Inc.) or Mesa Specialty Gases®. See the Q8 Combustible and Toxic Gas transmitter product data sheet for all applications that require a local display, remote sensor and a wider range of gases and output options. Refer to all applicable Federal, State, Provincial and Local Health and Safety laws and regulations before using these products.
Applications: Mechanical Rooms, Warehouses, Refrigeration Plants, Industrial Plants, Process Monitoring, Leak Detection, Parking Garages, Auto/Truck Maintenance Facilities
Warranty :This product is under warranty for 2 years against manufacturing and material defects from the date of invoice. The invoice for the products also stands in place of the warranty certificate, a separate document is not issued.Delivery Information :ACI branded products are imported from United States of America factory specially to order. The estimated delivery time of the products is 5 weeks. In this product group, an additional shipping and customs fee of 450EUR is charged for orders under 4,000EUR.
A/1K-2W-RA-36'-BB - ACI
Automation Field Components
1,000 Ohm (Two Wires) RTD, Rigid Probe Averaging, 36', NEMA 3R Enclosure
A/CP-PO-8'-10'CL2P - ACI
Automation Field Components
10,000 Ohm Thermistor (Type II), Probe Only, 8'', 10' Plenum Cable
A/TTM1K-D-12'-4-GD - ACI
Automation Field Components
Transmitter w/ 1,000 Ohm RTD (NIST Cert), Duct, 12', Galvanized Enclosure, 4-20mA Output
TUCH2-18F11NC0CX-310XXXXXX - ACI
Automation Field Components
LCD, RH3%, SET, O/R, DEG F
A/DLP-2D5-W-B-N-B-1-C-3P-S - ACI
Automation Field Components
Differential Low Pressure, 2.5 inWC, Bidirectional, No Display, 0.25% Accuracy, w/ Pitot Tube, 0-10VDC Output, 3 Point Nist, Standard
TUCH2-16F2XXXXXX-316XXXXXX - ACI
Automation Field Components
LCD, RH3%, DEG F
Q8-GENL-100L-O-X-ACETYLENE - ACI
Automation Field Components
Expl Proof, Smart Sensor, Acetylene, 0-100% LEL, 3 SPDT Relays, NEMA 4X, 4-20mA, 2-10V, or Modbus RTU
A/1K-LTS-4X-10' - ACI
Automation Field Components
1,000 Ohm RTD, 2" Freezer Probe 316SS, NEMA 4X Enclosure, 10'