Q8-GENL-100L-O-X-ACETYLENE - ACI
Automation Field Components
Expl Proof, Smart Sensor, Acetylene, 0-100% LEL, 3 SPDT Relays, NEMA 4X, 4-20mA, 2-10V, or Modbus RTU
This item is temporarily out of stock.
It can be backordered right now, and we can ship it within 5 weeks.
0
140638
ACI
U.S.A.
{{CMP.TITLE}}
- Features
- Comments (0)
-
Data Sheet
Q8-GENL-100L-O-X-ACETYLENE - ACI
Automation Field Components
download pdfPlease contact us if you need any other document this item may have.
You can only download Technical Document (Datasheet) on this section.
The Q8 Series of Explosion Proof Gas Detectors are used in applications that require a rugged enclosure that meets the Class 1 Division 2 requirements. Each unit comes standard with an integral clock, digital display of concentration, relay status, STEL, TWA, and peak daily values of the gas being detected. A three-color backlight will flash depending on the level of alarm for operator safety. Setup and calibration is accomplished through non-intrusive magnetic switches that allow for programming of all parameters. A remote sensor option is available for toxic and combustible gases and should be used in applications where the main unit can be mounted at 3 to 6 feet off of the floor with the remote sensor being at the ceiling or floor levels to monitor the gas concentrations depending on the gas being monitored. Sensor types include electrochemical and catalytic bead sensors to meet the demand and performance requirements for particular industries. The Q8 uses Optomux and Modbus RS-485 protocol, 4-20 mA, 1-5 or 2-10 VDC and 3 SPDT Form 1C user adjustable relay contacts.
Warranty :This product is under warranty for 2 years against manufacturing and material defects from the date of invoice. The invoice for the products also stands in place of the warranty certificate, a separate document is not issued.Delivery Information :ACI branded products are imported from United States of America factory specially to order. The estimated delivery time of the products is 5 weeks. In this product group, an additional shipping and customs fee of 450EUR is charged for orders under 4,000EUR.
A/1K-2W-D-6'-4X - ACI
Automation Field Components
1,000 Ohm (Two Wires) RTD, Duct, 6', NEMA 4X Enclosure
A/10KS-I-6'-GD - ACI
Automation Field Components
10,000 Ohm Thermistor, Immersion, Welded Well, 6', Galvanized Enclosure
A/CP-RSO-A08-D3 - ACI
Automation Field Components
10,000 Ohm Thermistor (Type II), Room (R), Setpoint, Override, 1K to 11K Ohms, Warm/Cool Sticker
A/DLP-7K5-P-U-N-A-1-A-0P-S - ACI
Automation Field Components
Differential Low Pressure, 7500 Pascals, Unidirectional, No Display, 0.50% Accuracy, w/ Pitot Tube, 4-20mA Output, No Nist, Standard
A/BALCO-IM-2.5”-GD - ACI
Automation Field Components
1,000 Ohm Balco RTD, Immersion, Machined Well, 2.5", Galvanized Enclosure
A/CO2-R2S-AN-A02-G5 - ACI
Automation Field Components
Carbon Dioxide Sensor, Room, 0-2000 PPM (0-5V, 0-10V, 4-20mA), Temp 10K (Type III), Setpoint(0 to 20K), Blue/Red Sticker
A/MLP2-020-W-B-A-B-0P - ACI
Automation Field Components
Differential Pressure, Panel Mount, 20.00 inWC, BiDirectional, +/- 0.5% FSO, 0-5VDC
A/RH2-O-4X - ACI
Automation Field Components
Relative Humidity, RH Outputs: 0-5, 0-10 VDC & 4-20mA (Default), Outside Air, ± 2% Accuracy, NEMA 4X Enclosure