A/TT100-O-4-4X-POTTED - ACI
Automation Field Components
Transmitter w/ 100 Ohm RTD, Outside Air, NEMA 4X Enclosure, 4-20mA Output, Potted Board
This item is temporarily out of stock.
It can be backordered right now, and we can ship it within 5 weeks.
0
130843
ACI
U.S.A.
{{CMP.TITLE}}
- Features
- Comments (0)
-
Data Sheet
A/TT100-O-4-4X-POTTED - ACI
Automation Field Components
download pdfPlease contact us if you need any other document this item may have.
You can only download Technical Document (Datasheet) on this section.
The ACI Transmitter Outside Air Series features a two-wire, 4 to 20 mA loop powered output with optional 3-Wire voltage output signals available. These units are designed to be mounted out of direct sunlight on the North side of a building or under an eave or intake hood. The Ruggedized epoxy coated transmitters “-POT” option should be used in extreme environments or in applications where you are looking for improved accuracy and reduced thermal drift due to the thermally conductive epoxy and more consistent board temperatures. Zero and Span adjustments are available for recalibration in the field when using NIST Certified equipment. All units include a Weather Proof or NEMA/IP rated enclosure and 1/2” knockouts or ½” NPT threaded hubs for use during installation. We recommend the use of 18 to 22 AWG shielded cable for all temperature transmitter installations to protect against the introduction of noise onto the signal lines. ACI does offer recalibration services for any transmitters sent back to us for a nominal fee. Applications: Outside Air Temperature Sensing, Economizer Control, Cold Storage Facilities or Warehouses, High Moisture Environments
The ACI Transmitter Outside Air Series is covered by ACI's Five (5) Year Limited Warranty. The warranty can be found in the front of ACI's Sensors & Transmitters catalog, as well as on ACI's website, www.workaci.com.
Warranty :This product is under warranty for 2 years against manufacturing and material defects from the date of invoice. The invoice for the products also stands in place of the warranty certificate, a separate document is not issued.Delivery Information :ACI branded products are imported from United States of America factory specially to order. The estimated delivery time of the products is 5 weeks. In this product group, an additional shipping and customs fee of 450EUR is charged for orders under 4,000EUR.
A/TT100-HT-INW-6'-4-GD - ACI
Automation Field Components
Transmitter w/ 100 Ohm RTD, High Temperature Immersion, No Well, 6', Galvanized Enclosure, 4-20mA Output
A/1K-3W-HT-I-6'-GD - ACI
Automation Field Components
1,000 Ohm (Three Wires) RTD, High Temperature Immersion, Welded Well, 6', Galvanized Enclosure
A/TT1K-D-2'-2-EXPL - ACI
Automation Field Components
Transmitter w/ 1,000 Ohm RTD, Hazardous, Duct, 2', 2-10VDC Output
A/RH3-SP-05-NIST - ACI
Automation Field Components
Relative Humidity, RH Outputs: 0-5 VDC, Wall Plate 304SS, ± 3% Accuracy, 0-5VDC, NIST
A/DLP-002-W-U-D-B-0-B-0P-S - ACI
Automation Field Components
Differential Low Pressure, 2 inWC, Unidirectional, LCD, 0.25% Accuracy, No Pitot Tube, 0-5VDC Output, No Nist, Standard
A/1K-NI-R2SO-A09-C5 - ACI
Automation Field Components
1,000 Ohm Nickel RTD, Room (R2), Setpoint 0 to 2K Ohms, Override, Cool/Warm Sticker
A/MLP2-D25-W-B-A-C-3P - ACI
Automation Field Components
Differential Pressure, Panel Mount, 0.25 inWC, BiDirectional, +/- 0.5% FSO, 0-10VDC, 3 PT NIST
A/20K-R2 - ACI
Automation Field Components
20,000 Ohm Thermistor, Room (R2)