A/RH3-1K-2W-SP-010 - ACI
Automation Field Components
Relative Humidity, RH Outputs: 0-10VDC, Wall Plate 304SS, ± 3% Accuracy, 1,000 Ohm RTD (Two Wires), 0-10VDC Output
This item is temporarily out of stock.
It can be backordered right now, and we can ship it within 5 weeks.
0
138368
ACI
U.S.A.
{{CMP.TITLE}}
- Features
- Comments (0)
-
Data Sheet
A/RH3-1K-2W-SP-010 - ACI
Automation Field Components
download pdfPlease contact us if you need any other document this item may have.
You can only download Technical Document (Datasheet) on this section.
The ACI Relative Humidity Wall Plate Series utilizes a thermoset polymer capacitive sensing element with a factory applied hygroscopic filter to deliver a proportional analog voltage output signal. The hygroscopic filter provides added resistance to moisture, dust, and other chemicals for greater long-term reliability. The RH Stainless Plate transmitter features integral DIP switches for field selection of the proper output signal and supply voltage to meet your applications requirements. Each unit also contains 0%, 50%, and 100% test options to verify that the transmitter is both working and properly installed. Field calibration can be performed by using the increment and decrement calibration DIP switches without the need to replace the sensing element. These enhancements provide increased flexibility and outstanding long-term reliability. All RH Stainless Plate transmitters come standard with an attractive brushed finish stainless steel, single gang wall mounting plate and are designed to mount over a single gang junction box in the wall. The PCBs are conformally coated for added protection from moisture and other contaminants. A temporary plastic sensor cover is included to provide protection for the RH sensor from chemicals used in wash down applications. Three and Five-point NIST Calibration Certificates are available but they must be ordered separately when placing your order.
Warranty :This product is under warranty for 2 years against manufacturing and material defects from the date of invoice. The invoice for the products also stands in place of the warranty certificate, a separate document is not issued.Delivery Information :ACI branded products are imported from United States of America factory specially to order. The estimated delivery time of the products is 5 weeks. In this product group, an additional shipping and customs fee of 450EUR is charged for orders under 4,000EUR.
A/TTM1K-RA-36'-4-BB - ACI
Automation Field Components
Transmitter w/ 1,000 Ohm RTD (NIST Cert), Rigid Probe Averaging, 36', NEMA 3R Enclosure, 4-20mA Output
A/10K-E1-INW-2.5'-PB - ACI
Automation Field Components
10,000 Ohm (E1) Thermistor, Immersion, No Well, 2.5', Plastic Enclosure
A/100-3W-LT-I-6'-GD - ACI
Automation Field Components
100 Ohm (Three Wires) RTD, Low Temperature Immersion, 6' 316SS
PT 3' - ACI
Automation Field Components
Total Pressure Pitot Tube with Foam Gasket, 3'
A/AN-D-18'-GD - ACI
Automation Field Components
10,000 Ohm Thermistor (Type III), Duct, 18', Galvanized Enclosure
A/CP-I-2.5'-PB - ACI
Automation Field Components
10,000 Ohm Thermistor (Type II), Immersion, Welded Well, 2.5', Plastic Enclosure
TUCH2-CPF1XXXXXX-316XXXXXX - ACI
Automation Field Components
LCD, RH3%, DEG F
BN2110-FA-8-PB - ACI
Automation Field Components
BACnet MS/TP, Modbus RTU, Temperature, Flexible Cable Averaging, 8', Plastic Enclosure