A/CP-S10-PB-NIST - ACI
Automation Field Components
10,000 Ohm Thermistor (Type II), Strap On, 10" Strap, Plastic Enclosure, NIST cert
This item is temporarily out of stock.
It can be backordered right now, and we can ship it within 5 weeks.
0
147478
ACI
U.S.A.
{{CMP.TITLE}}
- Features
- Comments (0)
-
Data Sheet
A/CP-S10-PB-NIST - ACI
Automation Field Components
download pdfPlease contact us if you need any other document this item may have.
You can only download Technical Document (Datasheet) on this section.
The ACI Thermistor Strap-On Series features a 1.5” square copper plate with the sensor encapsulated to the back side of the plate to improve the thermal conductivity between the pipe and the sensor when an Immersion style sensor can’t be inserted into the pipe. Each sensor has two, 14 inch 22 AWG Etched Teflon colored lead wires to differentiate the different sensor types. The sensors in this series are manufactured using ACI’s proven double encapsulation process to eliminate the effects of moisture upon the sensors as well as to improve the thermal response times using our high quality, thermally conductive epoxy. The Strap-On Series sensors can be used to monitor pipe sizes from 1 ¼” to 10” in diameter. For best accuracy and increased thermal conduction between the pipe and the sensor, ACI recommends cleaning the pipe before applying thermal grease as well as to insulate the sensor from the effects of the ambient air. Optional weather proof enclosure and NIST certificates are available upon request.
Applications: Cold Water Systems, Hot Water Systems, Retrot, Hydronic Heating Systems, Chillers.
The ACI Thermistor Strap-On Series is covered by ACI's Five (5) Year Limited Warranty. The warranty can be found in the front of ACI's Sensors & Transmitters catalog, as well as on ACI's website, Www.Workaci.Com.
Warranty :This product is under warranty for 2 years against manufacturing and material defects from the date of invoice. The invoice for the products also stands in place of the warranty certificate, a separate document is not issued.Delivery Information :The stock quantity information reported in the product details is up to date. Products in stock can be shipped immediately. Products that are not in stock and whose delivery time is separately reported are shipped when the supply period is completed.
A/TT1K-IM-6'-4-PB - ACI
Automation Field Components
Transmitter w/ 1,000 Ohm RTD, Immersion, Machined Well, 6', Plastic Enclosure, 4-20mA Output
A/AN-BC-INW-2.5'-PB - ACI
Automation Field Components
10,000 Ohm Thermistor w/11K Shunt, Immersion, No Well, 2.5', Plastic Enclosure
A/TT1K-HT-I-6'-4-BB - ACI
Automation Field Components
Transmitter w/ 1,000 Ohm RTD, High Temperature Immersion, Welded Well, 6', NEMA 3R Enclosure, 4-20mA Output
A/TT1K-HT-D-8'-4-BB - ACI
Automation Field Components
Transmitter w/ 1,000 Ohm RTD, High Temperature Duct, 8' 316 SS, NEMA 3R, 4-20mA Output
A/TT1K-D-12'-4-4X - ACI
Automation Field Components
Transmitter w/ 1,000 Ohm RTD, Duct, 12', NEMA 4X Enclosure, 4-20mA Output
A/RH1-TTM1K-RP2-20'-4X-4 - ACI
Automation Field Components
Relative Humidity, RH Outputs: 0-5, 0-10 VDC & 4-20mA (Default), Remote Probe, 20' Plenum, NEMA 4X Enclosure, ± 1% Accuracy (NIST Cert), Transmitter w/ 1,000 Ohm RTD (NIST Cert), 4-20mA (Temp Output)
GP(0-200G)-20-P - ACI
Automation Field Components
Gage Pressure with Packard Connector, 0 to 200 psig, 4-20mA
A/AN-O-BB - ACI
Automation Field Components
10,000 Ohm Thermistor (Type III), Outside Air, NEMA 3R Enclosure