A/CP-PO-4'-10'CL2P-HS - ACI
Automation Field Components
10,000 Ohm Thermistor (Type II), Probe Only, 4', 10' Plenum Cable, w/ Adhesive Heat Shrink
This item is temporarily out of stock.
It can be backordered right now, and we can ship it within 5 weeks.
0
147742
ACI
U.S.A.
{{CMP.TITLE}}
- Features
- Comments (0)
-
Data Sheet
A/CP-PO-4'-10'CL2P-HS - ACI
Automation Field Components
download pdfPlease contact us if you need any other document this item may have.
You can only download Technical Document (Datasheet) on this section.
The ACI Platinum Probe Only Series features a ¼” diameter stainless steel probe with two or three, 14 or 24 inch, 22 AWG Etched Teflon colored lead wires to differentiate the different sensor types. The three-wire “-3W” option should be ordered if using with a 3-Wire temperature transmitter or sensor configuration on your building management system or PLC (Programmable Logic Controller). The purpose of the 3rd wire is to compensate for any external lead wire resistance that will affect your sensor output. ACI recommends the use of an 18 AWG lead wires to reduce the external lead wire resistance when using a Platinum RTD sensor. The sensors in this series are manufactured using ACI’s proven double encapsulation process to eliminate the effects of moisture on the sensors and to increase the thermal response time using our high quality, thermally conductive epoxy. The probe is designed to be used in duct and immersion applications when used with the proper length thermowell. Optional lead length, cable types and NIST Certificates are available as referenced in the ordering grid on the Product Data Sheet. Applications: Roof Top Units, Air Handlers, Supply/Discharge Air/Return/Mixed/Exhaust Air Duct Temperature Sensing, Immersion Temperature Sensors, Replacement Temperature Sensors, Hydronic Water Systems
Warranty :This product is under warranty for 2 years against manufacturing and material defects from the date of invoice. The invoice for the products also stands in place of the warranty certificate, a separate document is not issued.Delivery Information :ACI branded products are imported from United States of America factory specially to order. The estimated delivery time of the products is 5 weeks. In this product group, an additional shipping and customs fee of 450EUR is charged for orders under 4,000EUR.
A/CP-IM-6'-BB - ACI
Automation Field Components
10,000 Ohm Thermistor (Type II), Immersion, Machined Well, 6', NEMA 3R Enclosure
A/AN-BC-DO-12' - ACI
Automation Field Components
10,000 Ohm Thermistor w/11K Shunt, Duct, Without Box, 12'
A/AN-RS-A14-B4 - ACI
Automation Field Components
10,000 Ohm Thermistor (Type III), Room (R), Setpoint 10K to 0 Ohms, 55-85 Sticker
A/RH5-AN-RS-A03-C5 - ACI
Automation Field Components
Relative Humidity, RH Outputs: 0-5, 0-10 VDC & 4-20mA (Default), Room (R), ± 5% Accuracy, 10,000 Ohm Thermistor (Type III), Setpoint:0-10K
A/TUCH2-CP-0113 - ACI
Automation Field Components
LCD, RH2%, SET, O/R, DEG F
A/1K-2W-A-50'-GD - ACI
Automation Field Components
1,000 Ohm (Two Wires) RTD, Copper Averaging, 50', Galvanized Enclosure
A/1K-2W-S-PB - ACI
Automation Field Components
1,000 Ohm (Two Wires) RTD, Strap On, Plastic Enclosure
A/TT1K-O-2-BB - ACI
Automation Field Components
Transmitter w/ 1,000 Ohm RTD, Outside Air, NEMA 3R Enclosure, 2-10VDC Output