PXP1.3 - ACI
Automation Field Components
Analog Input (0-5VDC), Pressure Output (0-15PSI), Single Valve, 0.010" Bleed Orifice, (0-10V, 0-15V, 0-20mA Selectable)
This item is temporarily out of stock.
It can be backordered right now, and we can ship it within 5 weeks.
0
127207
ACI
U.S.A.
{{CMP.TITLE}}
- Features
- Comments (0)
-
Data Sheet
PXP1.3 - ACI
Automation Field Components
download pdfPlease contact us if you need any other document this item may have.
You can only download Technical Document (Datasheet) on this section.
The PXP*.3 is an electric to pneumatic transducer which converts an analog electrical input signal to a proportional pneumatic output. The PXP*.3 will automatically modulate its control valve(s) to regulate the branch line pressure to the selected set point as determined by the input signal. The PXP*.3 offers four selectable input ranges of 0 to 5, 0 to 10, 0 to 15 VDC and 0-20 mA that produce a 0 to 15 psig modulating output. A 0-5 VDC feedback signal indicating the resultant branch line pressure, is also provided. This signal varies linearly with branch pressure (0 volts = 0 psig, 5 volts = 15 psig). The PXP0.3 is a single valve version that does not bleed or exhaust air. Its operation depends on the pneumatic circuit where it is installed to consume between 14 and 73 standard cubic inches per minute (scim). The PXP1.3, 5.3, and 7.3 are constant bleed controllers with branch exhaust response time determined by the bleed orifice size and pressure differentials (see page 2 ordering information). If power fails, the PXP1.3, 5.3, or 7.3 will continue to bleed through the bleed orifice until branch pressure is zero psig. A 3-way solenoid valve assembly may be used with the bleed type PXP1.3, 5.3, or 7.3 to allow control to fail back to the original local controller if power fails.
- Three way mixing valve control
- Pilot positioner control
- Compressor staging
- Chiller loading
Warranty :This product is under warranty for 2 years against manufacturing and material defects from the date of invoice. The invoice for the products also stands in place of the warranty certificate, a separate document is not issued.Delivery Information :ACI branded products are imported from United States of America factory specially to order. The estimated delivery time of the products is 5 weeks. In this product group, an additional shipping and customs fee of 450EUR is charged for orders under 4,000EUR.
A/AN-I-6'-4X - ACI
Automation Field Components
10,000 Ohm Thermistor (Type III), Immersion, Welded Well, 6', NEMA 4X Enclosure
A/10KS-RA-24'-PB - ACI
Automation Field Components
10,000 Ohm Thermistor, Rigid Probe Averaging, 24', Plastic Enclosure
A/TTM100-D-8'-4-GD - ACI
Automation Field Components
Transmitter w/ 100 Ohm RTD (NIST Cert), Duct, 8', Galvanized Enclosure, 4-20mA Output
85930-018-098 - ACI
Automation Field Components
Smart Sensor Replacement, Silane, 0-50 ppm
A/TUC2-AN-0043 - ACI
Automation Field Components
10,000 Ohm Thermistor (Type III), Setpoint, w/ Override, LCD
A/20K-O-4X - ACI
Automation Field Components
20,000 Ohm Thermistor, Outside Air, NEMA 4X Enclosure
A/TT100-LT-BP-4-GD-8' - ACI
Automation Field Components
Transmitter w/ 100 Ohm RTD, Low Temperature Bullet Probe, 1", 316SS, 8', 4-20mA Output
A/TT1K-BP-4-GD-20'CL2P - ACI
Automation Field Components
Transmitter w/ 1,000 Ohm RTD, Bullet Probe, 1", 20' Plenum Cable, Galvanized Enclosure, 4-20mA Output