A/CP-I-2.5'-PB - ACI
Automation Field Components
10,000 Ohm Thermistor (Type II), Immersion, Welded Well, 2.5', Plastic Enclosure
This item is temporarily out of stock.
It can be backordered right now, and we can ship it within 5 weeks.
0
122063
ACI
U.S.A.
{{CMP.TITLE}}
- Features
- Comments (0)
-
Data Sheet
A/CP-I-2.5'-PB - ACI
Automation Field Components
download pdfPlease contact us if you need any other document this item may have.
You can only download Technical Document (Datasheet) on this section.
The ACI Thermistor Immersion Series features a ¼” diameter stainless steel probe with two, 14 inch 22 AWG Etched Teflon colored lead wires depending on the probe length ordered to differentiate the sensor types. The sensors in this series are manufactured using ACI’s proven double encapsulation process to eliminate the effects of moisture and to increase the response times using our high quality, thermally conductive epoxy. The immersion sensors include a welded thermowell “-I” version but can be ordered without the welded thermowell “-INW” version. The “INW” version includes a standard ½” NPS Male process thread to be used with an optional machined thermowell or in an existing thermowell application. Optional NEMA/IP rated enclosures and NIST certificates are available the back of the product data sheet. Applications: Chilled Water Systems, Hot Water Systems, Boilers, Pumps, Compressor, Chillers
Warranty :This product is under warranty for 2 years against manufacturing and material defects from the date of invoice. The invoice for the products also stands in place of the warranty certificate, a separate document is not issued.Delivery Information :ACI branded products are imported from United States of America factory specially to order. The estimated delivery time of the products is 5 weeks. In this product group, an additional shipping and customs fee of 450EUR is charged for orders under 4,000EUR.
A/AN-PO-4'-20'CL2P-HS - ACI
Automation Field Components
10k Ohm (Type III) Thermistor, Probe Only, 4', 20' Plenum Cable, w/ Additional Moisture Protection
84330-621-000 - ACI
Automation Field Components
NEMA 4X Enclosure for M-Controller
A/DLP-D25-W-B-N-A-0-C-3P-S - ACI
Automation Field Components
Differential Low Pressure, 0.25 inWC, Bidirectional, No Display, 0.50% Accuracy, No Pitot Tube, 0-10VDC Output, 3 Point Nist, Standard
A/CO2-R2SO-AN-A10-G5 - ACI
Automation Field Components
Carbon Dioxide Sensor, Room, 0-2000 PPM, (0-5V, 0-10V, 4-20mA), Temp (10K Type III), Setpoint (0-1K), Blue/Red Sticker, Override
A/TUCH2-CP-0125 - ACI
Automation Field Components
LCD, RH2%, SET, DEG F
A/TT100-O-SUN-4 - ACI
Automation Field Components
Transmitter w/ 100 Ohm RTD, Outside Air, Sun Shield, 4-20mA Output
A/GLYCOL-3PT KIT - ACI
Automation Field Components
8.5 oz. Bottle, 304SS Mounting Bracket, Screws, (3) PG7 Cable Glands, (3) 316 SS Thermowells, No Glycol
AUD VERSION #4 - ACI
Automation Field Components
Floating Point Input (5 sec), Analog Output, Version 4, (360 sec Selectable),