A/100-3W-INW-4'-GD - ACI
Automation Field Components
100 Ohm (Three Wires) RTD, Immersion, No Well, 4', Galvanized Enclosure
This item is temporarily out of stock.
It can be backordered right now, and we can ship it within 5 weeks.
0
119464
ACI
U.S.A.
{{CMP.TITLE}}
- Features
- Comments (0)
-
Data Sheet
A/100-3W-INW-4'-GD - ACI
Automation Field Components
download pdfPlease contact us if you need any other document this item may have.
You can only download Technical Document (Datasheet) on this section.
The galvanized metal box, no well configuration has male 1/2 inch NPT threads. The sensing element is double encapsulated to avoid sensor failures caused by moisture infiltration. ACI also standardizes with etched Teflon lead wires and wells must be ordered separately for this part. ACI immersion temperature sensors are designed for HVAC, Building Automation Systems, and light industrial applications. Specific applications include: chillers, hot water systems, tanks, and boilers. NOTE: Welded thermowells are not intended for moving water or high pressure service. Fluid velocity and wake frequency are primary factors in well failure. Machined thermowells should be used in these types of applications.
- Negative temperature coefficient
- Double encapsulated sensor
- Foam pad
Warranty :This product is under warranty for 2 years against manufacturing and material defects from the date of invoice. The invoice for the products also stands in place of the warranty certificate, a separate document is not issued.Delivery Information :The stock quantity information reported in the product details is up to date. Products in stock can be shipped immediately. Products that are not in stock and whose delivery time is separately reported are shipped when the supply period is completed.
A/TT1K-LT-D-4'-2-BB - ACI
Automation Field Components
Transmitter w/ 1,000 Ohm RTD, Low Temperature Duct, 4' 316SS, 2-10VDC Output, NEMA 3R Enclosure
A/3K-PO-4'-20'CL2P-HS - ACI
Automation Field Components
3,000 Ohm Thermistor, Probe Only, 4', 20' Plenum Cable, w/ Adhesive Heat Shrink
A/CP-INW-6'-4X - ACI
Automation Field Components
10,000 Ohm Thermistor (Type II), Immersion, No Well, 6', NEMA 4X Enclosure
A/RH3-AN-BC-D-4X - ACI
Automation Field Components
Relative Humidity, RH Outputs: 0-5, 0-10 VDC & 4-20mA (Default), Duct, ± 3% Accuracy, 10,000 Ohm Thermistor w/ 11K Shunt, NEMA 4X Enclosure
RN (0-300) - ACI
Automation Field Components
Resistor Network (0 to 300 Ohms)
85930-018-201 - ACI
Automation Field Components
Smart Sensor replacment, Carbon Monoxide, 0-1000 ppm
A/TT1K-O-4-4X-POTTED - ACI
Automation Field Components
Transmitter w/ 1,000 Ohm RTD, Outside Air, NEMA 4X Enclosure, 4-20mA Output, Potted Board
CO2-010-D - ACI
Automation Field Components
Carbon Dioxide Sensor, Duct Mount, 0-10VDC Output