A/AN-I-2.5'-4X - ACI
Automation Field Components
10,000 Ohm Thermistor (Type III), Immersion, Welded Well, 2.5', NEMA 4X Enclosure
This item is temporarily out of stock.
It can be backordered right now, and we can ship it within 5 weeks.
0
121455
ACI
U.S.A.
{{CMP.TITLE}}
- Features
- Comments (0)
-
Data Sheet
A/AN-I-2.5'-4X - ACI
Automation Field Components
download pdfPlease contact us if you need any other document this item may have.
You can only download Technical Document (Datasheet) on this section.
The polycarbonate NEMA 4X, immersion configuration is designed for wet environments and adds a level of corrosion resistance. It has male 1/2 inch NPT threads and the sensing element is double encapsulated to avoid sensor failures caused by moisture infiltration. ACI also standardizes with etched Teflon lead wires and a two part well is included with this configuration. ACI immersion temperature sensors are designed for HVAC, Building Automation Systems, and light industrial applications. Specific applications include: chillers, hot water systems, tanks, and boilers. NOTE: Welded thermowells are not intended for moving water or high pressure service. Fluid velocity and wake frequency are primary factors in well failure. Machined thermowells should be used in these types of applications.
- Negative temperature coefficient
- Double encapsulated sensor
- NEMA 4X enclosure
Warranty :This product is under warranty for 2 years against manufacturing and material defects from the date of invoice. The invoice for the products also stands in place of the warranty certificate, a separate document is not issued.Delivery Information :ACI branded products are imported from United States of America factory specially to order. The estimated delivery time of the products is 5 weeks. In this product group, an additional shipping and customs fee of 450EUR is charged for orders under 4,000EUR.
A/0.1CP-INW-6'-BB-NIST - ACI
Automation Field Components
High Accuracy, 10,000 Ohm Thermistor (Type II), Immersion, No Well, 6', NEMA 3R Enclosure, NIST Cert
A/AN-DO-18' - ACI
Automation Field Components
10,000 Ohm Thermistor (Type III), Duct, Without Box, 18'
A/1K-3W-HT-D-8'-GD - ACI
Automation Field Components
1,000 Ohm (Three Wires) RTD, High Temperature Duct, 8' 316 SS, Galvanized Enclosure
A/DLP-002-W-U-D-B-0-B-0P-S - ACI
Automation Field Components
Differential Low Pressure, 2 inWC, Unidirectional, LCD, 0.25% Accuracy, No Pitot Tube, 0-5VDC Output, No Nist, Standard
A/MLP2-001-W-B-A-B-0P - ACI
Automation Field Components
Differential Pressure, Panel Mount, 1.00 inWC, BiDirectional, +/- 0.5% FSO, 0-5VDC
A/GP(0-100G)-20-P-N4 - ACI
Automation Field Components
Gage Pressure Transducer with Packard Connector and NEMA 4, 0 to 100 psig, 4-20mA
Q5-NO-100P-O-X - ACI
Automation Field Components
Smart Sensor, Nitric Oxide, 0-100 ppm, 3 SPDT Relays, NEMA 4X, 4-20mA, 2-10V, or Modbus RTU
PXP5.3G - ACI
Automation Field Components
Analog Input (0-5VDC), Pressure Output (0-15PSI), Single Valve, 0.005" Bleed Orifice, Gauge, (0-10V, 0-15V, 0-20mA Selectable)