A/1K-3W-INW-6'-4X - ACI
Automation Field Components
1,000 Ohm (Three Wires) RTD, Immersion, No Well, 6', NEMA 4X Enclosure
This item is temporarily out of stock.
It can be backordered right now, and we can ship it within 5 weeks.
0
140821
ACI
U.S.A.
{{CMP.TITLE}}
- Features
- Comments (0)
-
Data Sheet
A/1K-3W-INW-6'-4X - ACI
Automation Field Components
download pdfPlease contact us if you need any other document this item may have.
You can only download Technical Document (Datasheet) on this section.
The polycarbonate NEMA 4X, no well configuration is designed for wet environments and adds a level of corrosion resistance. It has male 1/2 inch NPT threads and the sensing element is double encapsulated to avoid sensor failures caused by moisture infiltration. ACI also standardizes with etched Teflon lead wires and wells must be ordered separately for this part. ACI immersion temperature sensors are designed for HVAC, Building Automation Systems, and light industrial applications. Specific applications include: chillers, hot water systems, tanks, and boilers. NOTE: Welded thermowells are not intended for moving water or high pressure service. Fluid velocity and wake frequency are primary factors in well failure. Machined thermowells should be used in these types of applications.
- Negative temperature coefficient
- Double encapsulated sensor
- NEMA 4X enclosure
Warranty :This product is under warranty for 2 years against manufacturing and material defects from the date of invoice. The invoice for the products also stands in place of the warranty certificate, a separate document is not issued.Delivery Information :ACI branded products are imported from United States of America factory specially to order. The estimated delivery time of the products is 5 weeks. In this product group, an additional shipping and customs fee of 450EUR is charged for orders under 4,000EUR.
A/CP-DO-18'-96'CL2P-QC - ACI
Automation Field Components
10,000 Ohm Thermistor (Type II), Duct, Without Box, 18', 96' Plenum Cable, Quick Connects
A/100-3W-PO-6' - ACI
Automation Field Components
100 Ohm (Three Wires) RTD, Probe Only, 6'
A/CP-RSO-LCD-F-A04-B4 - ACI
Automation Field Components
10,000 Ohm Thermistor (Type II), Room (R), w/ Setpoint (1051.1 to 51.1), and Override, LCD, 55-85 Sticker
A/DLP-D25-W-B-D-B-2-C-0P-S - ACI
Automation Field Components
Differential Low Pressure, 0.25 inWC, Bidirectional, LCD, 0.25% Accuracy, w/ Din Rail, 0-10VDC Output, No Nist, Standard
Q8-H2-1000P-O-X - ACI
Automation Field Components
Expl Proof, Smart Sensor, Hydrogen, 0-1000 ppm, 3 SPDT Relays, 4-20mA, 2-10V, or Modbus RTU
A/TUCH2-1035-0003 - ACI
Automation Field Components
LCD, RH3%, SET, OR, FAN, DEG F
R-SWITCH - ACI
Automation Field Components
Remote Reset Switch for M-Switch
RN (8.5K-11.5K) - ACI
Automation Field Components
Resistor Network (8.5K to 11.5K Ohms)