A/TTM1K-O-4-4X-POTTED - ACI
Automation Field Components
Transmitter w/ 1,000 Ohm RTD (NIST Cert), Outside Air, NEMA 4X Enclosure, 4-20mA Output, Potted Board
This item is temporarily out of stock.
It can be backordered right now, and we can ship it within 5 weeks.
0
147126
ACI
U.S.A.
{{CMP.TITLE}}
- Features
- Comments (0)
-
Data Sheet
A/TTM1K-O-4-4X-POTTED - ACI
Automation Field Components
download pdfPlease contact us if you need any other document this item may have.
You can only download Technical Document (Datasheet) on this section.
The ACI Transmitter Outside Air Series features a two-wire, 4 to 20 mA loop powered output with optional 3-Wire voltage output signals available. These units are designed to be mounted out of direct sunlight on the North side of a building or under an eave or intake hood. The Ruggedized epoxy coated transmitters “-POT” option should be used in extreme environments or in applications where you are looking for improved accuracy and reduced thermal drift due to the thermally conductive epoxy and more consistent board temperatures. Zero and Span adjustments are available for recalibration in the field when using NIST Certified equipment. All units include a Weather Proof or NEMA/IP rated enclosure and 1/2” knockouts or ½” NPT threaded hubs for use during installation. ACI recommends the use of 18 to 22 AWG shielded cable for all temperature transmitter installations to protect against the introduction of noise onto the signal lines. ACI does offer recalibration services for any transmitters sent back to us for a nominal fee. Applications: Outside Air Temperature Sensing, Economizer Control, Cold Storage Facilities or Warehouses, High Moisture Environments
Warranty :This product is under warranty for 2 years against manufacturing and material defects from the date of invoice. The invoice for the products also stands in place of the warranty certificate, a separate document is not issued.Delivery Information :The stock quantity information reported in the product details is up to date. Products in stock can be shipped immediately. Products that are not in stock and whose delivery time is separately reported are shipped when the supply period is completed.
A/TTM1K-I-4'-4-PB - ACI
Automation Field Components
Transmitter w/ 1,000 Ohm RTD (NIST Cert), Immersion, Welded Well, 4', Plastic Enclosure, 4-20mA Output
A/BALCO-D-18'-GD - ACI
Automation Field Components
1,000 Ohm Balco RTD, Duct, 18', Galvanized Enclosure
A/TTM1K-I-4'-2-GD - ACI
Automation Field Components
Transmitter w/ 1,000 Ohm RTD (NIST Cert), Immersion, Welded Well, 4', Galvanized Enclosure, 2-10VDC Output
A/RH2-AN-RSO-A02-C5 - ACI
Automation Field Components
Relative Humidity, RH Outputs: 0-5, 0-10 VDC & 4-20mA (Default), Room (R), ± 2% Accuracy, 10K Ohm Thermistor (Type III), Setpoint:0-20K, Override, cool/warm
A/TTM1K-LTS-1-GD-50' - ACI
Automation Field Components
Transmitter w/ 1,000 Ohm RTD (NIST Cert), 2" Freezer Probe 316SS, Galvanized Enclosure, 50', 1-5VDC Output
A/1K-3W-PO-8” - ACI
Automation Field Components
1,000 Ohm (Three Wires) RTD, Probe Only, 8"
RH5-TT1K-R2-4 - ACI
Automation Field Components
Relative Humidity, RH Outputs: 0-5, 0-10 VDC & 4-20mA (Default), Room, ± 5% Accuracy, Transmitter w/ 1,000 Ohm RTD, 4-20mA (Temp)
PXP2.3 - ACI
Automation Field Components
Analog Input (0-5VDC), Pressure Output (0-15PSI), Dual Valve, Maintains Branch Pressure, (0-10V, 0-15V, 0-20mA Selectable)