A/100-2W-I-4'-GD - ACI
Automation Field Components
100 Ohm (Two Wires) RTD, Immersion, Welded Well, 4', Galvanized Enclosure
This item is temporarily out of stock.
It can be backordered right now, and we can ship it within 5 weeks.
0
119438
ACI
U.S.A.
{{CMP.TITLE}}
- Features
- Comments (0)
-
Data Sheet
A/100-2W-I-4'-GD - ACI
Automation Field Components
download pdfPlease contact us if you need any other document this item may have.
You can only download Technical Document (Datasheet) on this section.
The galvanized metal box, with well configuration has male 1/2 inch NPT threads. The sensing element is double encapsulated to avoid sensor failures caused by moisture infiltration. ACI also standardizes with etched Teflon lead wires and 2 part wells for this part. ACI immersion temperature sensors are designed for HVAC, Building Automation Systems, and light industrial applications. Specific applications include: chillers, hot water systems, tanks, and boilers. NOTE: Welded thermowells are not intended for moving water or high pressure service. Fluid velocity and wake frequency are primary factors in well failure. Machined thermowells should be used in these types of applications.
- Negative temperature coefficient
- Double encapsulated sensor
- Foam pad
Warranty :This product is under warranty for 2 years against manufacturing and material defects from the date of invoice. The invoice for the products also stands in place of the warranty certificate, a separate document is not issued.Delivery Information :The stock quantity information reported in the product details is up to date. Products in stock can be shipped immediately. Products that are not in stock and whose delivery time is separately reported are shipped when the supply period is completed.
A/TTM100-I-4'-1-GD - ACI
Automation Field Components
Transmitter w/ 100 Ohm RTD (NIST Cert), Immersion, Welded Well, 4', Galvanized Enclosure, 1-5VDC Output
A/3K-PO-4'-EXPL - ACI
Automation Field Components
3,000 Ohm Thermistor, Hazardous, Probe Only, 4'
A/CP-INW-4'-4X - ACI
Automation Field Components
10,000 Ohm Thermistor (Type II), Immersion, No Well, 4', NEMA 4X Enclosure
A/1K-NI-D-8'-BB - ACI
Automation Field Components
1,000 Ohm Nickel RTD, Duct, 8', NEMA 3R Enclosure
A/TT100-D-4'-2-GD - ACI
Automation Field Components
Transmitter w/ 100 Ohm RTD, Duct, 4', Galvanized Enclosure, 2-10VDC Output
A/AN-BC-O-SUN - ACI
Automation Field Components
10,000 Ohm Thermistor w/11K Shunt, Outside Air, Sun Shield
A/TT1K-A-80'-4-GD - ACI
Automation Field Components
Transmitter w/ 1,000 Ohm RTD, Copper Averaging, 80', Galvanized Enclosure, 4-20mA Output
A/RH3-AN-BC-O - ACI
Automation Field Components
Relative Humidity, RH Outputs: 0-5, 0-10 VDC & 4-20mA (Default), Outside Air, ± 3% Accuracy, 10,000 Ohm Thermistor w/11K Shunt, Euro Enclosure