WT2630A-300 - ACI
Automation Field Components
Wireless, Temp, Room, Trans Interval 300 sec
This item is temporarily out of stock.
It can be backordered right now, and we can ship it within 5 weeks.
0
137003
ACI
U.S.A.
{{CMP.TITLE}}
- Features
- Comments (0)
-
Data Sheet
WT2630A-300 - ACI
Automation Field Components
download pdfPlease contact us if you need any other document this item may have.
You can only download Technical Document (Datasheet) on this section.
The WT2630 is a battery operated spread spectrum wireless room, or wall, temperature sensor or thermostat. The override button (B & C models only) located on the side of the sensor housing can be assigned to a digital output in the Series 2000 family of receivers for occupancy override or similar applications. The setpoint adjustment (B Model only) can be assigned to an analog output in the ACI MESHNET900® receiver. The output will then be used by a controller for a variety of control setpoint ranges (user defined) and other applications such as dimming of light and window blinds control. Series 2000 wireless sensors utilize reliable Spread Spectrum Radio technology. They can be installed easily in minutes eliminating hundreds of feet of wire and saving installation cost while reducing installation labor risks. The Meshnet 900® sensor Data-Link LED confirms the data transmission was received by the receiver for fast and reliable positioning of the sensor during installation. Together with the ACI Wireless receivers and controllers, the wireless sensors can be used with any LON, BacNet, MODbus, or DDC control system or panel. ACI wireless sensors and systems are designed for retrofit HVAC, Building Automation, and industrial systems. Typical applications include: churches, museums, historical sites, etc. They are also suitable for flexible office/work station lay outs, auditoriums and conference centers with movable walls, or wide open warehouse spaces.
- Data Link LEDs confirm data transmission
- ACI can provide additional set up support before shipping
Warranty :This product is under warranty for 2 years against manufacturing and material defects from the date of invoice. The invoice for the products also stands in place of the warranty certificate, a separate document is not issued.Delivery Information :ACI branded products are imported from United States of America factory specially to order. The estimated delivery time of the products is 5 weeks. In this product group, an additional shipping and customs fee of 450EUR is charged for orders under 4,000EUR.
A/CP-INW-6'-BB-NIST - ACI
Automation Field Components
10,000 Ohm Thermistor (Type II), Immersion, no Well, 6', NEMA 3R Enclosure, NIST Cert
A/TT1K-IM-2.5'-4-BB - ACI
Automation Field Components
Transmitter w/ 1,000 Ohm RTD, Immersion, Machined Well, 2.5', NEMA 3R Enclosure, 4-20mA Output
A/1K-2W-D-8'-EXPL - ACI
Automation Field Components
1,000 Ohm (Two Wires) RTD, Hazardous, Duct, 8'
A/100-2W-D-8'-PB - ACI
Automation Field Components
100 Ohm (Two Wires) RTD, Duct, 8', Plastic Enclosure
A/CP-R2SO-232-A11-C5 - ACI
Automation Field Components
10,000 Ohm Thermistor (Type II), Room (R2), w/ Setpoint and Override, RS232
A/3K-I-6”-4X - ACI
Automation Field Components
3,000 Ohm Thermistor, Immersion, Welded Well, 6", NEMA 4X Enclosure
A/TT1K-R2-2 - ACI
Automation Field Components
Transmitter w/ 1,000 Ohm RTD, Room (R2), 2-10VDC Output
PXP0.3G - ACI
Automation Field Components
Analog Input (0-5VDC), Pressure Output (0-15PSI), Single Valve, No Bleed Orifice, Gauge, (0-10V, 0-15V, 0-20mA Selectable)