RR2552BE - ACI
Automation Field Components
Wireless, Signal Repeater, 24VAC, NEMA 4X Enclosure
This item is temporarily out of stock.
It can be backordered right now, and we can ship it within 5 weeks.
0
130694
ACI
U.S.A.
{{CMP.TITLE}}
- Features
- Comments (0)
-
Data Sheet
RR2552BE - ACI
Automation Field Components
download pdfPlease contact us if you need any other document this item may have.
You can only download Technical Document (Datasheet) on this section.
The mesh network Meshnet 900® RR2552 signal repeater utilizes reliable Spread Spectrum Radio technology. It can be installed easily in minutes to increase the transmission distance between wireless sensors and the receivers. The maximum radio transmission distance is dependent on building type. In a typical commercial building with steel I-beam construction, concrete floors with reinforcing rod, and metal stud walls, it can be expected that transmissions will penetrate vertically through floors and horizontally through 200 to 500 feet of walls, furniture and air. Multiple repeaters can be used to extend the transmission distance to thousands of feet inside any commercial and industrial buildings. The Meshnet 900® sensor Data & Link LED confirms the data transmission was received by the receiver for fast and reliable positioning of the repeaters during installation. There is no need for special wireless installation equipment or site survey tools. The Meshnet 900® wireless system can be used with any LON, BacNet, MODbus, DDC control system or panel. ACI wireless sensors and systems are designed for retrofit HVAC, Building Automation, and industrial systems. Typical applications include: churches, museums, historical sites, etc. They are also suitable for flexible office/work station lay outs, auditoriums and conference centers with movable walls, or wide open warehouse spaces.
- Data Link LEDs confirm data transmission
- ACI can provide additional set up support before shipping
Warranty :This product is under warranty for 2 years against manufacturing and material defects from the date of invoice. The invoice for the products also stands in place of the warranty certificate, a separate document is not issued.Delivery Information :ACI branded products are imported from United States of America factory specially to order. The estimated delivery time of the products is 5 weeks. In this product group, an additional shipping and customs fee of 450EUR is charged for orders under 4,000EUR.
A/AN-IM-4'-PB - ACI
Automation Field Components
10,000 Ohm Thermistor (Type III), Immersion, Machined Well, 4', Plastic Enclosure
A/1K-3W-LT-I-6'-GD - ACI
Automation Field Components
1,000 Ohm (Three Wires) RTD, Low Temperature Immersion, Welded Well, 6', Galvanized Enclosure
SC-50 - ACI
Automation Field Components
Leak Sensing Cable, conductive fluids, Male/Female connectors, 50ft (15.24m)
A/DLP-2K5-P-B-D-B-3-A-0P-S - ACI
Automation Field Components
Differential Low Pressure, 2500 Pascals, Bidirectional, LCD, 0.25% Accuracy, w/ Pitot Tube and Din Rail, 4-20mA Output, No Nist, Standard
A/RH3-R-LCD-05 - ACI
Automation Field Components
Relative Humidity, Room, Humidity with LCD, 0-5 VDC
ASENSE-R-REL - ACI
Automation Field Components
Carbon Dioxide Sensor, Room Mount, 0-2000 ppm, Relay and Temperature, Room Mount, 0-10VDC & 4-20mA
A/RH5-CSI-O - ACI
Automation Field Components
Relative Humidity, RH Outputs: 0-5, 0-10 VDC & 4-20mA (Default), Outside Air, ± 5% Accuracy, 10,000 Ohm Thermistor (CSI), Euro Enclosure
CO-D - ACI
Automation Field Components
Carbon Monoxide Sensor, 0-125 PPM Default, (250 PPM Max), Duct Mount, 4-20mA or 2-10VDC Output