Q8-CL2-5P-0-A - ACI
Automation Field Components
Q8-CL2/ Chlorine Electrochemical 0-5PPM, Explosion Proof Enclosure
This item is temporarily out of stock.
It can be backordered right now, and we can ship it within 5 weeks.
0
150027
ACI
U.S.A.
{{CMP.TITLE}}
- Features
- Comments (0)
-
Data Sheet
Q8-CL2-5P-0-A - ACI
Automation Field Components
download pdfPlease contact us if you need any other document this item may have.
You can only download Technical Document (Datasheet) on this section.
The Q8 Series of Explosion Proof Gas Detectors are used in applications that require a rugged enclosure that meets the Class 1 Division 2 requirements. Each unit comes standard with an integral clock, digital display of concentration, relay status, STEL, TWA, and peak daily values of the gas being detected. A three-color backlight will flash depending on the level of alarm for operator safety. Setup and calibration is accomplished through non-intrusive magnetic switches that allow for programming of all parameters. A remote sensor option is available for toxic and combustible gases and should be used in applications where the main unit can be mounted at 3 to 6 feet off of the floor with the remote sensor being at the ceiling or floor levels to monitor the gas concentrations depending on the gas being monitored. Sensor types include electrochemical and catalytic bead sensors to meet the demand and performance requirements for particular industries. The Q8 uses Optomux and Modbus RS-485 protocol, 4-20 mA, 1-5 or 2-10 VDC and 3 SPDT Form 1C user adjustable relay contacts.
Warranty :This product is under warranty for 2 years against manufacturing and material defects from the date of invoice. The invoice for the products also stands in place of the warranty certificate, a separate document is not issued.Delivery Information :The stock quantity information reported in the product details is up to date. Products in stock can be shipped immediately. Products that are not in stock and whose delivery time is separately reported are shipped when the supply period is completed.
A/1K-NI-PO-4'-6'CL2P - ACI
Automation Field Components
1,000 Ohm Nickel RTD, Probe Only, 4', 6' Plenum Cable
A/DLP-003-W-U-N-A-0-A-0P-S - ACI
Automation Field Components
Differential Low Pressure, 3 inWC, Unidirectional, No Display, 0.50% Accuracy, No Pitot Tube, 4-20mA Output, No Nist, Standard
A/CP-RS-A03-G5 - ACI
Automation Field Components
10,000 Ohm Thermistor (Type II), Room (R), Setpoint, 0 to 10K Ohms, Blue/Red Sticker
A/MLP2-050-P-U-A-C-0P - ACI
Automation Field Components
Differential Pressure, Panel Mount, 50 pascals, UniDirectional, +/- 0.5% FSO, 0-10VDC
A/RH1-TT1K-D-BB-2 - ACI
Automation Field Components
Relative Humidity, RH Outputs: 0-5, 0-10 VDC & 4-20mA (Default), Duct, ± 1% Accuracy, Transmitter w/ 1,000 Ohm RTD, NEMA 3R (2G) Enclosure, 2-10 VDC (Temp)
A/TUCH2-4-20MA-0045 - ACI
Automation Field Components
LCD, RH2%, SET, DEG F
A/RH2-1K-NI-O-SUN - ACI
Automation Field Components
Relative Humidity, RH Outputs: 0-5, 0-10 VDC & 4-20mA (Default), Outside Air, ± 2% Accuracy, 1,000 Ohm Nickel RTD, Sun Shield
A/RH3-TT100-O-4X-4 - ACI
Automation Field Components
Relative Humidity, RH Outputs: 0-5, 0-10 VDC & 4-20mA (Default), Outside Air, ± 3% Accuracy, Transmitter w/ 100 Ohm RTD, NEMA 4X Enclosure, 4-20mA (Temp)