BN2110-FA-8-PB - ACI
Automation Field Components
BACnet MS/TP, Modbus RTU, Temperature, Flexible Cable Averaging, 8', Plastic Enclosure
This item is temporarily out of stock.
It can be backordered right now, and we can ship it within 5 weeks.
0
146618
ACI
U.S.A.
{{CMP.TITLE}}
- Features
- Comments (0)
-
Data Sheet
BN2110-FA-8-PB - ACI
Automation Field Components
download pdfPlease contact us if you need any other document this item may have.
You can only download Technical Document (Datasheet) on this section.
The BN Series Flexible Averaging networked temperature sensors are a cost e ective, single
point native BACnet™ or Modbus sensing solution designed to reduce the need for additional
input modules or building management controllers when a limited number of input points are
available. The BN series o ers both BACnet™ and Modbus protocols in one device, providing
great exibility with various systems. The BTL Certi cation provides con dence that these
sensors may be used in any new or retro t installation using a BACnet™ MS/TP controller with
third party BACnet™ devices. Each sensor features a 18 AWG Plenum rated cable that is
manufactured with 4 or 9 sensing points determined by the length of the sensing element. The averaging sensors provide a better average
temperature of the air inside the duct when compared to a single point duct sensor. The exible averaging sensors are limited to applications where
operating temperatures are limited and where high humidity, chemical resistance and UV Light Air Treatment Systems aren’t required. Each of the
sensing elements is protected by a dual wall adhesive lined heat shrink tubing to provide a level of moisture protection to the sensing elements.
The sensor length should be determined by the dimensional size of your duct. These sensors incorporate a conformally coated printed circuit board
for long-term reliability. The ABS enclosure features an easy open latch for easy access to the wiring and internal dip switches for quick setup and
installation. Please contact KONTROLYUM for more information regarding the BN Series communicating sensors.
Applications: Supply / Return / Discharge / Mixed Duct Air Temperature Sensing, Chilled Water / Hot Water / Hydronic Heating Systems, Air / Gas
Temperatures, Chillers, Boilers, Hot Water Heaters & Refrigeration Systems
The ACI BN Series BACnet™ sensors are covered by ACI's Five (5) Year Limited Warranty. The warranty can be found in the front of ACI's
Sensors & Transmitters catalog, as well as on ACI's website, www.workaci.comWarranty :This product is under warranty for 2 years against manufacturing and material defects from the date of invoice. The invoice for the products also stands in place of the warranty certificate, a separate document is not issued.Delivery Information :ACI branded products are imported from United States of America factory specially to order. The estimated delivery time of the products is 5 weeks. In this product group, an additional shipping and customs fee of 450EUR is charged for orders under 4,000EUR.
A/TT1K-LT-D-12'-4-GD - ACI
Automation Field Components
Transmitter w/ 1,000 Ohm RTD, Low Temperature Duct, 12' 316SS, Galvanized Enclosure, 4-20mA Output
A/10K-E1-I-2.5'-EXPL - ACI
Automation Field Components
10,000 Ohm (E1) Thermistor, Hazardous, Immersion, Welded Well, 2.5'
A/TT1K-INW-2.5'-4-BB - ACI
Automation Field Components
Transmitter w/ 1,000 Ohm RTD, Immersion, No Well, 2.5', NEMA 3R Enclosure, 4-20mA Output
A/CP-INW-6'-GD - ACI
Automation Field Components
10,000 Ohm Thermistor (Type II), Immersion, No Well, 6', Galvanized Enclosure
A/CP-D-8'-BB - ACI
Automation Field Components
10,000 Ohm Thermistor (Type II), Duct, 8', NEMA 3R Enclosure
A/CP-R2SO-A04-B4 - ACI
Automation Field Components
10,000 Ohm Thermistor (Type II), Room (R2), w/ Setpoint 1051.1 to 51.1, and Override, 55-85 sticker
B8-CO-250P-0-X - ACI
Automation Field Components
BACnet MSTP, Expl Proof, Smart Sensor, Carbon Monoxide, 0-250 ppm, 3 SPDT Relays, NEMA 4X
Q5-CH3CO-100L-O-X - ACI
Automation Field Components
Smart Sensor, Acetone, 0-100% LEL, 3 SPDT Relays, NEMA 4X, 4-20mA, 2-10V, or Modbus RTU