BN2110-D-4-PB - ACI
Automation Field Components
BACnet MS/TP, Modbus RTU, Temperature, Duct, SS, 4", Plastic Enclosure
This item is temporarily out of stock.
It can be backordered right now, and we can ship it within 5 weeks.
0
146516
ACI
U.S.A.
{{CMP.TITLE}}
- Features
- Comments (0)
-
Data Sheet
BN2110-D-4-PB - ACI
Automation Field Components
download pdfPlease contact us if you need any other document this item may have.
You can only download Technical Document (Datasheet) on this section.
The BN Series Duct and Immersion networked temperature sensors are a cost effective, single point native BACnet™ or Modbus sensing solution designed to reduce the need for additional input modules or building management controllers when a limited number of input points are available. The BN series offers both BACnet™ and Modbus protocols in one device, providing great flexibility with various systems. The BTL Certification provides confidence that these sensors may be used in any new or retrofit installation using a BACnet™ MS/TP controller with third party BACnet™ devices. These sensors incorporate a conformally coated printed circuit board for long-term reliability. The ABS enclosure features an easy open latch for easy access to the wiring and internal dip switches for quick setup and installation. Please contact KONTROLYUM for more information regarding the BN Series communicating sensors.
Applications: Supply / Return / Discharge / Mixed Duct Air Temperature Sensing, Chilled Water / Hot Water / Hydronic Heating Systems, Air / Gas Temperatures, Chillers, Boilers, Hot Water Heaters & Refrigeration Systems
The ACI BN Series BACnet™ sensors are covered by ACI's Five (5) Year Limited Warranty. The warranty can be found in the front of ACI's Sensors & Transmitters catalog, as well as on ACI's website, www.workaci.com
Warranty :This product is under warranty for 2 years against manufacturing and material defects from the date of invoice. The invoice for the products also stands in place of the warranty certificate, a separate document is not issued.Delivery Information :ACI branded products are imported from United States of America factory specially to order. The estimated delivery time of the products is 5 weeks. In this product group, an additional shipping and customs fee of 450EUR is charged for orders under 4,000EUR.
A/TT1K-LT-INW-2.5'-4-BB - ACI
Automation Field Components
Transmitter w/ 1,000 Ohm RTD, Low Temperature Immersion, No Well, 2.5', NEMA 3R Enclosure, 4-20mA Output
A/TTM1K-I-4'-2-BB - ACI
Automation Field Components
Transmitter w/ 1,000 Ohm RTD (NIST Cert), Immersion, Welded Well, 4', NEMA 3R Enclosure, 2-10VDC Output
A/AN-PO-12' - ACI
Automation Field Components
10,000 Ohm Thermistor (Type III), Probe Only, 12'
A/1K-3W-INW-4'-GD - ACI
Automation Field Components
1,000 Ohm (Three Wires) RTD, Immersion, No Well, 4', Galvanized Enclosure
A/TTM100-D-12'-4-GD - ACI
Automation Field Components
Transmitter w/ 100 Ohm RTD (NIST Cert), Duct, 12', Galvanized Enclosure, 4-20mA Output
A/AN-RS-A01-C5 - ACI
Automation Field Components
10,000 Ohm Thermistor (Type III), Room (R), Setpoint 0 to 100K Ohms, Cool/Warm Sticker
RN (8250-17.4K) - ACI
Automation Field Components
Resistor Network (8.25K to 17.4K Ohms)
A/TT100-O-SUN-4 - ACI
Automation Field Components
Transmitter w/ 100 Ohm RTD, Outside Air, Sun Shield, 4-20mA Output