BI-BOX-0 - ACI
Automation Field Components
4 Channel Relay Input Module, Q-Controller
This item is temporarily out of stock.
It can be backordered right now, and we can ship it within 5 weeks.
0
138899
ACI
U.S.A.
{{CMP.TITLE}}
- Features
- Comments (0)
-
Data Sheet
BI-BOX-0 - ACI
Automation Field Components
download pdfPlease contact us if you need any other document this item may have.
You can only download Technical Document (Datasheet) on this section.
The BI-Box Model is used for reading out contacts such as conventional switches and push buttons. Each BI-Box module has 4x inputs with internal 24VDC power source which can drive the LED in Q-Switch. The BI-Box and other IO-Box modules connect and communicate via a RS-485 2- wire connection to the Q-Controller. The Q-Controller supports any combination of the IO Box, the BI-Box can be up to 31 modules, plus 4 onboard switch inputs in Q-Controller, allowing a total of 128 switch inputs via a single Q-Controller. All BI-Box configuration information is stored in Q-Controller, so replacement modules with the same address do not need to be configured. The BI-Box’ high density packaging, removable terminal block and DIN rail mounting saves time and panel space. The module snaps easily onto standard top hat (T) profile DIN rail.
Warranty :This product is under warranty for 2 years against manufacturing and material defects from the date of invoice. The invoice for the products also stands in place of the warranty certificate, a separate document is not issued.Delivery Information :ACI branded products are imported from United States of America factory specially to order. The estimated delivery time of the products is 5 weeks. In this product group, an additional shipping and customs fee of 450EUR is charged for orders under 4,000EUR.
A/100-3W-PO-4'-6'CL2P - ACI
Automation Field Components
100 Ohm (Three Wires) RTD, Probe Only, 4', 6' Plenum Cable
A/AN-BC-RA-12'-GD - ACI
Automation Field Components
10,000 Ohm Thermistor w/11K Shunt, Rigid Probe Averaging, 12', Galvanized Enclosure
A/100-3W-PO-18' - ACI
Automation Field Components
100 Ohm (Three Wires) RTD, Probe Only, 18'
A/100-3W-D-4'-BB - ACI
Automation Field Components
100 Ohm (Three Wires) RTD, Duct, 4', NEMA 3R Enclosure
A/CSI-S10-GD - ACI
Automation Field Components
10,000 Ohm (CSI) Thermistor, Strap On, 10" Strap, Galvanized Enclosure
A/AN-RSO-A03-B4 - ACI
Automation Field Components
10,000 Ohm Thermistor (Type III), Room (R), Setpoint 0 to 10K Ohms, Override, 55-85 Sticker
A/CO2-R2SO-20K-A14-G5 - ACI
Automation Field Components
Carbon Dioxide Sensor, Room, 0-2000 PPM (0-5V, 0-10V, 4-20mA), Temp (20K), Setpoint (10K-0K), Blue/Red Sticker, Override
A/BALCO-R - ACI
Automation Field Components
1,000 Ohm Balco RTD, Room (R)