ASA - ACI
Automation Field Components
Analog Input, Analog Output, Analog Signal Amplifier
This item is temporarily out of stock.
It can be backordered right now, and we can ship it within 5 weeks.
0
102030
ACI
U.S.A.
{{CMP.TITLE}}
- Features
- Comments (0)
-
Data Sheet
ASA - ACI
Automation Field Components
download pdfPlease contact us if you need any other document this item may have.
You can only download Technical Document (Datasheet) on this section.
The ASA is an analog signal amplifier which accepts an analog voltage or current signal and outputs a voltage signal. Several preset input ranges are jumper selectable. ASA is designed to give a Building Automation System signal output the power (wattage) to control MaxitrolTM gas valves normally installed in rooftop units. The top-adjust trimmer potentiometers can be used to make fine adjustments of gain and offset. The output gain can be adjusted anywhere from 1 to 20 times the input on the ASA (gain will vary depending on type of input). The offset of the output can be +/- 0 to 20 VDC. The ASA is covered by ACI's Two (2) Year Limited Warranty.
- Provides control of dimming ballasts
- Low temperature applications (-40)
Warranty :This product is under warranty for 2 years against manufacturing and material defects from the date of invoice. The invoice for the products also stands in place of the warranty certificate, a separate document is not issued.Delivery Information :ACI branded products are imported from United States of America factory specially to order. The estimated delivery time of the products is 5 weeks. In this product group, an additional shipping and customs fee of 450EUR is charged for orders under 4,000EUR.
A/100-3W-INW-2.5'-GD - ACI
Automation Field Components
100 Ohm (Three Wires) RTD, Immersion, No Well, 2.5', Galvanized Enclosure
A/10K-E1-D-18'-EXPL - ACI
Automation Field Components
10,000 Ohm (E1) Thermistor, Hazardous, Duct, 18'
A/20K-D-12'-GD - ACI
Automation Field Components
20,000 Ohm Thermistor, Duct, 12', Galvanized Enclosure
A/TTM1K-INW-4'-4-GD - ACI
Automation Field Components
Transmitter w/ 1,000 Ohm RTD (NIST Cert), Immersion, No Well, 4', Galvanized Enclosure, 4-20mA Output
A/AN-A-50'-BB - ACI
Automation Field Components
10,000 Ohm Thermistor (Type III), Copper Averaging, 50', NEMA 3R Enclosure
TUC2-10-F3-1J-C0-C-X-X-X - ACI
Automation Field Components
0-10VDC Output, Setpoint, w/ Override, LCD
A/TUC2-AN-0074 - ACI
Automation Field Components
10,000 Ohm Thermistor (Type III), Setpoint, w/ Override, LCD
A/100KS-S-GD - ACI
Automation Field Components
100,000 Ohm Thermistor, Strap On, Galvanized Enclosure