ARM2 - ACI
Automation Field Components
Analog Input(VDC), Dual Analog Output (mA), Analog Rescaling Module (Signal Splitter)
This item is temporarily out of stock.
It can be backordered right now, and we can ship it within 5 weeks.
0
102029
ACI
U.S.A.
{{CMP.TITLE}}
- Features
- Comments (0)
-
Data Sheet
ARM2 - ACI
Automation Field Components
download pdfPlease contact us if you need any other document this item may have.
You can only download Technical Document (Datasheet) on this section.
The ARM2 will accept a single analog (voltage or current) signal and split that signal into two DC non-isolated current sourcing outputs that can be re-scaled. Its primary application is as a signal splitter. The outputs are always scaled identically and will always track each other. The top-adjust trimmer potentiometers can be used to make ne adjustments to output ranges for maximum flexibility. This device can attenuate an input signal to 100%. The ARM2 also has an adjustable gain and offset. The output gain can be adjusted from 1 to 20 times the input (gain will vary depending on input). The ARM2 can also reverse an input signal and has a regulated 23 VDC power supply output to power sensors. The ARM2 can also accept a resistance input by using voltage divider applications.
The ARM2 is field calibratable, however, factory calibration is available upon request for an additional charge and will speed up installation time for the end user.
Click HERE to a list of field calibration instructions.
Warranty :This product is under warranty for 2 years against manufacturing and material defects from the date of invoice. The invoice for the products also stands in place of the warranty certificate, a separate document is not issued.Delivery Information :ACI branded products are imported from United States of America factory specially to order. The estimated delivery time of the products is 5 weeks. In this product group, an additional shipping and customs fee of 450EUR is charged for orders under 4,000EUR.
A/TT100-IM-4'-4-PB - ACI
Automation Field Components
Transmitter w/ 100 Ohm RTD, Immersion, Machined Well, 4', Plastic Enclosure, 4-20mA Output
A/TTM1K-D-8'-4-EXPL - ACI
Automation Field Components
Transmitter w/ 1,000 Ohm RTD (NIST Cert), Hazardous, Duct, 8', 4-20mA Output
A/RH1-TTM1K-O-3.25”-4X-4 - ACI
Automation Field Components
Relative Humidity, RH Outputs: 0-5, 0-10 VDC & 4-20mA (Default), Outside Air (3.25" SS), NEMA 4X Enclosure, ± 1% Accuracy (NIST Cert), Transmitter w/ 1,000 Ohm RTD (NIST Cert), 4-20mA (Temp Output)
A/RH2-AN-O-4X-NIST - ACI
Automation Field Components
Relative Humidity, RH Outputs: 0-5, 0-10 VDC & 4-20mA (Default), Outside Air, ± 2% Accuracy, 10,000 Ohm Thermistor (Type III), NEMA 4X Enclosure, NIST Cert
B6-CO/NO2-10P - ACI
Automation Field Components
BACnet MSTP, Smart Sensor, Combination, Main: CO 0-250 ppm, Remote: NO2 0-10 ppm, 3 SPDT Relays, NEMA 4X
A/1K-3W-PM - ACI
Automation Field Components
1,000 Ohm (Three Wires) RTD, Pipe Mount, Brass
A/RH1-R - ACI
Automation Field Components
Relative Humidity, RH Outputs: 0-5, 0-10 VDC & 4-20mA (Default), Room (R), ± 1% Accuracy, Infinity Enclosure (Beige)
A/TT100-LTS-4-4X-10' - ACI
Automation Field Components
Transmitter w/ 100 Ohm RTD, 2" Freezer Probe 316SS, NEMA 4X Enclosure, 10', 4-20mA Output