AIM2 - ACI
Automation Field Components
Analog Input, Analog Output, Analog Isolation Module w/ Rescaling
This item is temporarily out of stock.
It can be backordered right now, and we can ship it within 5 weeks.
0
101794
ACI
U.S.A.
{{CMP.TITLE}}
- Features
- Comments (0)
-
Data Sheet
AIM2 - ACI
Automation Field Components
download pdfPlease contact us if you need any other document this item may have.
You can only download Technical Document (Datasheet) on this section.
The AIM2 optically isolates the analog (voltage or current) signal to the device being controlled. It will accept any input signals between 0 and 20 volts, or 0 and 20 mA, and output any signal within those ranges. The AIM2 has preset or adjustable inputs, and preset or adjustable outputs, that can be either voltage or current. The current signals on the input or output, can be either sink or source. The AIM2 requires one external 24 VAC isolation transformer with floating secondary for power. It has an on-board 24 VAC isolation transformer to supply power to the isolated output. The AIM2 is covered by ACI's Two (2) Year Limited Warranty.
- Grounded electric actuator isolation
- Fluorescent light dimmer isolation
- Ground loop isolation
Warranty :This product is under warranty for 2 years against manufacturing and material defects from the date of invoice. The invoice for the products also stands in place of the warranty certificate, a separate document is not issued.Delivery Information :ACI branded products are imported from United States of America factory specially to order. The estimated delivery time of the products is 5 weeks. In this product group, an additional shipping and customs fee of 450EUR is charged for orders under 4,000EUR.
A/1K-NI-D-12'-4X - ACI
Automation Field Components
1,000 Ohm Nickel RTD, Duct, 12', NEMA 4X Enclosure
A/TTM1K-D-18'-4-4X - ACI
Automation Field Components
Transmitter w/ 1,000 Ohm RTD (NIST Cert), Duct, 18', NEMA 4X Enclosure, 4-20mA Output
A/100-3W-INW-4'-4X - ACI
Automation Field Components
100 Ohm (Three Wires) RTD, Immersion, No Well, 4', NEMA 4X Enclosure
A/CP-R2-NIST - ACI
Automation Field Components
10,000 Ohm Thermistor, Room (R2), NIST Cert
A/AN-RS-A10-B4 - ACI
Automation Field Components
10,000 Ohm Thermistor (Type III), Room (R), Setpoint 0 to 1K Ohms, 55-85 Sticker
BN2130-D - ACI
Automation Field Components
BACnet MS/TP, Modbus RTU, Relative Humidity and Temperature, Duct, Euro Enclosure
B6-CO/NO2-10P - ACI
Automation Field Components
BACnet MSTP, Smart Sensor, Combination, Main: CO 0-250 ppm, Remote: NO2 0-10 ppm, 3 SPDT Relays, NEMA 4X
A/MLP2-002-W-B-B-A-0P - ACI
Automation Field Components
Differential Pressure, Panel Mount, 2.00 inWC, BiDirectional, +/- 0.25% FSO, 4-20mA