A/TTM1K-HT-D-4'-4-GD - ACI
Automation Field Components
Transmitter w/ 1,000 Ohm RTD (NIST Cert), High Temperature Duct, 4' 316SS, Galvanized Enclosure, 4-20mA Output
This item is temporarily out of stock.
It can be backordered right now, and we can ship it within 5 weeks.
0
145051
ACI
U.S.A.
{{CMP.TITLE}}
- Features
- Comments (0)
-
Data Sheet
A/TTM1K-HT-D-4'-4-GD - ACI
Automation Field Components
download pdfPlease contact us if you need any other document this item may have.
You can only download Technical Document (Datasheet) on this section.
The ACI High Temperature Duct Series sensors and transmitters are a single point duct sensor featuring a three wire RTD sensor assembly and a 316 Series stainless steel probe. The three wire sensors can be used with a two-wire transmitter by connecting the two (White) colored wires to one of the RTD terminal blocks with the third wire (Red) wire going to the second RTD Terminal block. The purpose of the third wire is to compensate for external lead wire resistance that will affect the accuracy of your sensor output when using with a three-wire temperature transmitter or sensor configuration on your Building Management System or PLC (Programmable Logic Controller. ACI recommends the use of 18 AWG lead wires to reduce the external lead wire resistance when using the A/100/1K-3W-D style Platinum RTD series sensors without temperature transmitter. The operating specifications are for both the sensor and transmitter as designated in the specification table. Standard enclosure options include the “-GD” Galvanized or “-BB” Aluminum weather proof enclosure. NIST Certificates are available for all of the configurations listed in the ordering grid on the back of the product data sheet. For best accuracy, ACI recommends the use of the TTM100 or TTM1K Series Matched transmitters with a 3 or 5 Point NIST Calibration Certificate since they include a second calibration step in which the RTD and transmitter are calibrated together as a system, which will remove most of the sensor error over the calibrated temperature span of the transmitter. Applications: Burners, Boilers, Stacks, Exhaust, Incinerators, Ovens, Conveyor Systems, Process Heating, Process Control
Warranty :This product is under warranty for 2 years against manufacturing and material defects from the date of invoice. The invoice for the products also stands in place of the warranty certificate, a separate document is not issued.Delivery Information :The stock quantity information reported in the product details is up to date. Products in stock can be shipped immediately. Products that are not in stock and whose delivery time is separately reported are shipped when the supply period is completed.
A/TT100-D-12'-4-EXPL - ACI
Automation Field Components
Transmitter w/ 100 Ohm RTD, Hazardous, Duct, 12', 4-20mA Output
A/DLP-002-W-U-D-B-0-A-0P-S - ACI
Automation Field Components
Differential Low Pressure, 2 inWC, Unidirectional, LCD, 0.25% Accuracy, No Pitot Tube, 4-20mA Output, No Nist, Standard
85930-017-017 - ACI
Automation Field Components
Smart Sensor replacement, Propane, 0-100% LEL
A/MLP2-010-W-B-A-C-0P - ACI
Automation Field Components
Differential Pressure, Panel Mount, 10.00 inWC, BiDirectional, +/- 0.5% FSO, 0-10VDC
RN (8K-12K) - ACI
Automation Field Components
Resistor Network (8K to 12K Ohms)
A/TT100-O-2-4X-POTTED - ACI
Automation Field Components
Transmitter w/ 100 Ohm RTD, Outside Air, NEMA 4X Enclosure, 2-10VDC Output, Potted Board
LE11145 - ACI
Automation Field Components
Transformer, LE Series, PV:120 VAC, SV:24 VAC, VA:20, HUB: 1TF
ARM2 - ACI
Automation Field Components
Analog Input(VDC), Dual Analog Output (mA), Analog Rescaling Module (Signal Splitter)