A/TTM100-O-4-EH - ACI
Automation Field Components
Transmitter w/ 100 Ohm RTD (NIST Cert), Outside Air, Euro Enclosure, 4-20mA Output
This item is temporarily out of stock.
It can be backordered right now, and we can ship it within 5 weeks.
0
142915
ACI
U.S.A.
{{CMP.TITLE}}
- Features
- Comments (0)
-
Data Sheet
A/TTM100-O-4-EH - ACI
Automation Field Components
download pdfPlease contact us if you need any other document this item may have.
You can only download Technical Document (Datasheet) on this section.
The ACI Transmitter Outside Air Series features a two-wire, 4 to 20 mA loop powered output with optional 3-Wire voltage output signals available. These units are designed to be mounted out of direct sunlight on the North side of a building or under an eave or intake hood. The Ruggedized epoxy coated transmitters “-POT” option should be used in extreme environments or in applications where you are looking for improved accuracy and reduced thermal drift due to the thermally conductive epoxy and more consistent board temperatures. Zero and Span adjustments are available for recalibration in the field when using NIST Certified equipment. All units include a Weather Proof or NEMA/IP rated enclosure and 1/2” knockouts or ½” NPT threaded hubs for use during installation. ACI recommends the use of 18 to 22 AWG shielded cable for all temperature transmitter installations to protect against the introduction of noise onto the signal lines. ACI does offer recalibration services for any transmitters sent back to us for a nominal fee. Applications: Outside Air Temperature Sensing, Economizer Control, Cold Storage Facilities or Warehouses, High Moisture Environments
Warranty :This product is under warranty for 2 years against manufacturing and material defects from the date of invoice. The invoice for the products also stands in place of the warranty certificate, a separate document is not issued.Delivery Information :ACI branded products are imported from United States of America factory specially to order. The estimated delivery time of the products is 5 weeks. In this product group, an additional shipping and customs fee of 450EUR is charged for orders under 4,000EUR.
A/TT1K-D-4'-1-4X - ACI
Automation Field Components
Transmitter w/ 1,000 Ohm RTD, Duct, 4', NEMA 4X Enclosure, 1-5VDC Output
A/TT100-I-6'-4-BB - ACI
Automation Field Components
Transmitter w/ 100 Ohm RTD, Immersion, Welded Well, 4', NEMA 3R Enclosure, 4-20mA Output
A/GP(0-100G)-20-P-N4 - ACI
Automation Field Components
Gage Pressure Transducer with Packard Connector and NEMA 4, 0 to 100 psig, 4-20mA
B5-H2S-100P-O-X - ACI
Automation Field Components
BACnet MSTP, Smart Sensor, Hydrogen Sulphide, 0-100 ppm, 3 SPDT Relays, NEMA 4X, 4-20mA, 2-10V, or Modbus RTU
A/AN-FA-24'-4X - ACI
Automation Field Components
10,000 Ohm Thermistor (Type III), Flexible Cable Averaging, 24', NEMA 4X Enclosure
A/RH2-3K-R2 - ACI
Automation Field Components
Relative Humidity, RH Outputs: 0-5, 0-10 VDC & 4-20mA (Default), Room (R2), ± 2% Accuracy, 3,000 Ohm Thermistor (ASI)
A/RH2-AN-RO - ACI
Automation Field Components
Relative Humidity, RH Outputs: 0-5, 0-10 VDC & 4-20mA (Default), Room (R), ± 2% Accuracy, 10K Ohm Thermistor (Type III), w/ Override
A/TT100-BO-2 - ACI
Automation Field Components
Transmitter w/ 100 Ohm RTD, Board Only, 2-10VDC Output