A/TTM100-D-18'-4-PB - ACI
Automation Field Components
Transmitter w/ 100 Ohm RTD (NIST Cert), Duct, 18', Plastic Enclosure, 4-20mA Output
This item is temporarily out of stock.
It can be backordered right now, and we can ship it within 5 weeks.
0
119864
ACI
U.S.A.
- Features
- Comments (0)
-
Data Sheet
A/TTM100-D-18'-4-PB - ACI
Automation Field Components
download pdfPlease contact us if you need any other document this item may have.
You can only download Technical Document (Datasheet) on this section.
The ACI Transmitter Duct Series features a two-wire, 4 to 20 mA loop powered output signal with an optional 3-Wire voltage output signal available. All transmitters include Zero and Span adjustments for field calibration and are calibrated using NIST Certfied Calibration equipment.
ACI recommends the use of an 18 to 22 AWG shielded cable for all temperature transmitter installations to help eliminate the possibility of noise being introduced onto the signal lines. The sensor assemblies are manufactured using colored Etched Teflon lead wires and ACI’s
proven double encapsulation process to eliminate the effects of moisture on the sensors as well as increased response times using our high quality, thermally conductive epoxy. The duct sensors include a foam pad to properly seal the duct and limit vibration once installed.
Optional NEMA/IP rated weather proof enclosures are available as specified on the back of the product data sheet. For best accuracy, ACI recommends the use of the A/TTM Series Matched transmitters with 3 or 5 Point NIST Calibration Certificate, since they include a second calibration
step in which the RTD and transmitter are calibrated together as a system.Applications: Chilled Water Systems, Hot Water Systems, Boilers, Pumps, Compressors, Chillers, Cooling Towers, Process Control
The ACI Transmitter Duct Series is covered by ACI's Five (5) Year Limited Warranty. The warranty can be found in the front of ACI's
Sensors & Transmitters catalog, as well as on ACI's website, www.workaci.com.Warranty :This product is under warranty for 2 years against manufacturing and material defects from the date of invoice. The invoice for the products also stands in place of the warranty certificate, a separate document is not issued.Delivery Information :ACI branded products are imported from United States of America factory specially to order. The estimated delivery time of the products is 5 weeks. In this product group, an additional shipping and customs fee of 450EUR is charged for orders under 4,000EUR.
A/AN-D-12'-PB-NIST - ACI
Automation Field Components
10,000 Ohm Thermistor (Type III), Duct, 12', Plastic Enclosure, NIST Cert
A/1K-NI-INW-6'-BB - ACI
Automation Field Components
1,000 Ohm Nickel RTD, Immersion, No Well, 6', NEMA 3R Enclosure
A/TTM100-D-12'-4-GD - ACI
Automation Field Components
Transmitter w/ 100 Ohm RTD (NIST Cert), Duct, 12', Galvanized Enclosure, 4-20mA Output
A/RH2-RP2-20'-EH - ACI
Automation Field Components
Relative Humidity, RH Outputs: 0-5, 0-10 VDC & 4-20mA (Default), Remote Probe, ± 2% Accuracy, 20' Plenum
A/TUC2-CP-0082 - ACI
Automation Field Components
10,000 Ohm Thermistor (Type II), Setpoint, w/ Override, LCD
QTS-61150X-N000000 - ACI
Automation Field Components
Toxic Gas Sensor, Nitrogen Dioxide, 0-6 PPM, 4-20mA Output, loop powered, Industrial NEMA 4X Aluminum sensor housing w/ Splash Guard
A/CP-A-12'-4X - ACI
Automation Field Components
10,000 Ohm Thermistor (Type II), Copper Averaging, 12', NEMA 4X Enclosure
A/TT1K-SP-4 - ACI
Automation Field Components
Transmitter w/ 1,000 Ohm RTD, Wall Plate, Stainless Steel, 4-20mA Output
