A/TT1K-A-50'-4-BB - ACI
Automation Field Components
Transmitter w/ 1,000 Ohm RTD, Copper Averaging, 50', NEMA 3R Enclosure, 4-20mA Output
This item is temporarily out of stock.
It can be backordered right now, and we can ship it within 5 weeks.
0
126615
ACI
U.S.A.
- Features
- Comments (0)
-
Data Sheet
A/TT1K-A-50'-4-BB - ACI
Automation Field Components
download pdfPlease contact us if you need any other document this item may have.
You can only download Technical Document (Datasheet) on this section.
The ACI Transmitter Copper Averaging Series features a two-wire, 4 to 20 mA loop powered output signal with an optional 3-Wire voltage output signal available. The Copper Averaging sensors are designed to be installed in medium to large ducts or air handling units where moisture, UV Light Air Treatment equipment, critical temperature control, higher corrosion resistance and faster response times when compared to similar Aluminum sensing elements. Copper has also been proven to provide an anti-bacterial effect on molds, fungus and other bacteria typically found in ducts. All transmitters include Zero and Span adjustments for field calibration and are calibrated using NIST Certified Calibration equipment. ACI recommends the use of an 18 to 22 AWG shielded cable for all temperature transmitter installations to reduce the possibility of noise being introduced onto the signal lines. The 1K Ohm Rigid Averaging sensor assemblies include a continuous sensing element the covers the entire length of the 8 to 100 foot sensing elements and are manufactured using Etched Teflon lead wires to differentiate between the different sensor types. All units are hermetically sealed using our epoxy material to eliminate the effects of moisture on the sensors. All Copper Averaging transmitters include a foam pad to properly seal the duct and limit vibration once installed. Optional NEMA/IP rated weather proof enclosures are available as specified on the back of the product data sheet. For best accuracy, ACI recommends the use of the A/TTM Series Matched transmitters with a 3 or 5 Point NIST Calibration Certificate, since they include a second calibration process in which the RTD and transmitter are calibrated together as a system.
Applications: Roof Top Units, Air Handlers, Monitoring Supply/Discharge/Return/Mixed Air Temperatures, Data Centers, Hospitals, Laboratories
The ACI Copper Averaging Transmitter Series is covered by ACI's Five (5) Year Limited Warranty. The warranty can be found in the front of ACI's Sensors & Transmitters catalog, as well as on ACI's website, www.workaci.com.
Warranty :This product is under warranty for 2 years against manufacturing and material defects from the date of invoice. The invoice for the products also stands in place of the warranty certificate, a separate document is not issued.Delivery Information :ACI branded products are imported from United States of America factory specially to order. The estimated delivery time of the products is 5 weeks. In this product group, an additional shipping and customs fee of 450EUR is charged for orders under 4,000EUR.
A/TT1K-LT-INW-6'-4-GD - ACI
Automation Field Components
Transmitter w/ 1,000 Ohm RTD, Low Temperature Immersion, 6', Galvanized Enclosure, 4-20mA Output
A/BALCO-D-18'-4X - ACI
Automation Field Components
1,000 Ohm Balco RTD, Duct, 18', NEMA 4X Enclosure
A/TT1K-LT-D-8'-2-GD - ACI
Automation Field Components
Transmitter w/ 1000 Ohm RTD, Low Temperature Duct, 8' 316 SS, Galvanized Enclosure, 2-10VDC Output
A/TUC2-CP-0164 - ACI
Automation Field Components
10,000 Ohm Thermistor (Type II), Setpoint, w/ Override, LCD
A/TUCH2-CP-0130 - ACI
Automation Field Components
LCD, RH3%, DEG F
A/20K-FA-12'-BB - ACI
Automation Field Components
20,000 Ohm Thermistor, Flexible Cable Averaging, 12', NEMA 3R Enclosure
A/CP-BBS - ACI
Automation Field Components
10,000 Ohm Thermistor (Type II), Flush Mount Button, Brass
A/10KS-BBS - ACI
Automation Field Components
10,000 Ohm Thermistor, Flush Mount Button, Brass
