A/TT100-O-4-BB - ACI
Automation Field Components
Transmitter w/ 100 Ohm RTD, Outside Air, NEMA 3R Enclosure, 4-20mA Output
This item is temporarily out of stock.
It can be backordered right now, and we can ship it within 5 weeks.
0
126251
ACI
U.S.A.
{{CMP.TITLE}}
- Features
- Comments (0)
-
Data Sheet
A/TT100-O-4-BB - ACI
Automation Field Components
download pdfPlease contact us if you need any other document this item may have.
You can only download Technical Document (Datasheet) on this section.
The ACI Transmitter Outside Air Series features a two-wire, 4 to 20 mA loop powered output with optional 3-Wire voltage output signals available. These units are designed to be mounted out of direct sunlight on the North side of a building or under an eave or intake hood. The Ruggedized epoxy coated transmitters “-POT” option should be used in extreme environments or in applications where you are looking for improved accuracy and reduced thermal drift due to the thermally conductive epoxy and more consistent board temperatures. Zero and Span adjustments are available for recalibration in the field when using NIST Certified equipment. All units include a Weather Proof or NEMA/IP rated enclosure and 1/2” knockouts or ½” NPT threaded hubs for use during installation. We recommend the use of 18 to 22 AWG shielded cable for all temperature transmitter installations to protect against the introduction of noise onto the signal lines. ACI does offer recalibration services for any transmitters sent back to us for a nominal fee. Applications: Outside Air Temperature Sensing, Economizer Control, Cold Storage Facilities or Warehouses, High Moisture Environments
The ACI Transmitter Outside Air Series is covered by ACI's Five (5) Year Limited Warranty. The warranty can be found in the front of ACI's Sensors & Transmitters catalog, as well as on ACI's website, www.workaci.com.
Warranty :This product is under warranty for 2 years against manufacturing and material defects from the date of invoice. The invoice for the products also stands in place of the warranty certificate, a separate document is not issued.Delivery Information :ACI branded products are imported from United States of America factory specially to order. The estimated delivery time of the products is 5 weeks. In this product group, an additional shipping and customs fee of 450EUR is charged for orders under 4,000EUR.
A/1K-3W-D-4'-4X - ACI
Automation Field Components
1,000 Ohm (Three Wires) RTD, Duct, 4', NEMA 4X Enclosure
A/TTM1K-D-4'-4-4X - ACI
Automation Field Components
Transmitter w/ 1,000 Ohm RTD (NIST Cert), Duct, 4', NEMA 4X Enclosure, 4-20mA Output
A/RH2-AN-R2SO-A38-D3 - ACI
Automation Field Components
Relative Humidity, RH Outputs: 0-5, 0-10 VDC & 4-20mA (Default), Room, ± 2% Accuracy, 10K Ohm Thermistor (Type III), Setpoint:20K-0, Override, Warm/Cool sticker
KW1850-P1-D-W - ACI
Automation Field Components
Power Meter, Bi-Directional, 18 Circuit, ANSI 0.5 Class Accuracy, Measurment Canada Approved, Serial/Ethernet Communications, Multiple Communication Protocols Standard, Rogowski Coil or Solid/Split Core CTs Input and LCD Display
TUCH2-CPF1XXXXXX-210XXXXXX - ACI
Automation Field Components
LCD, RH2%, DEG F
A/RH3-3K-O - ACI
Automation Field Components
Relative Humidity, RH Outputs: 0-5, 0-10 VDC & 4-20mA (Default), Outside Air, ± 3% Accuracy, 3,000 Ohm Thermistor (ASI), Euro Enclosure
A/TT1K-BO-1 - ACI
Automation Field Components
Transmitter w/ 1,000 Ohm RTD, Board Only, 1-5VDC Output
MS-KA/R - ACI
Automation Field Components
(1) LED, Key Test/Reset, Single Gang SS Plate