A/TT100-D-12'-2-PB - ACI
Automation Field Components
Transmitter w/ 100 Ohm RTD, Duct, 12', Plastic Enclosure, 2-10VDC Output
This item is temporarily out of stock.
It can be backordered right now, and we can ship it within 5 weeks.
0
119607
ACI
U.S.A.
{{CMP.TITLE}}
- Features
- Comments (0)
-
Data Sheet
A/TT100-D-12'-2-PB - ACI
Automation Field Components
download pdfPlease contact us if you need any other document this item may have.
You can only download Technical Document (Datasheet) on this section.
The ACI Transmitter Duct Series features a two-wire, 4 to 20 mA loop powered output signal with an optional 3-Wire voltage output signal available. All transmitters include Zero and Span adjustments for field calibration and are calibrated using NIST Certi ed Calibration equipment.
ACI recommends the use of an 18 to 22 AWG shielded cable for all temperature transmitter installations to help eliminate the possibility of noise being introduced onto the signal lines. The sensor assemblies are manufactured using colored Etched Teflon lead wires and ACI’s
proven double encapsulation process to eliminate the effects of moisture on the sensors as well as increased response times using our high quality, thermally conductive epoxy. The duct sensors include a foam pad to properly seal the duct and limit vibration once installed.
Optional NEMA/IP rated weather proof enclosures are available as specified on the back of the product data sheet. For best accuracy, ACI recommends the use of the A/TTM Series Matched transmitters with 3 or 5 Point NIST Calibration Certi cate, since they include a second calibration
step in which the RTD and transmitter are calibrated together as a system.Applications: Chilled Water Systems, Hot Water Systems, Boilers, Pumps, Compressors, Chillers, Cooling Towers, Process Control
The ACI Transmitter Duct Series is covered by ACI's Five (5) Year Limited Warranty. The warranty can be found in the front of ACI's
Sensors & Transmitters catalog, as well as on ACI's website, www.workaci.com.Warranty :This product is under warranty for 2 years against manufacturing and material defects from the date of invoice. The invoice for the products also stands in place of the warranty certificate, a separate document is not issued.Delivery Information :The stock quantity information reported in the product details is up to date. Products in stock can be shipped immediately. Products that are not in stock and whose delivery time is separately reported are shipped when the supply period is completed.
A/TTM100-D-18'-1-EXPL - ACI
Automation Field Components
Transmitter w/ 100 Ohm RTD (NIST Cert), Hazardous, Duct, 18', 1-5VDC Output
A/20K-DO-12'-6'CL2P - ACI
Automation Field Components
20,000 Ohm Thermistor, Duct, Without Box, 12', 6' Plenum Cable
A/1K-2W-RA-24'-BB - ACI
Automation Field Components
1,000 Ohm (Two Wires) RTD, Rigid Probe Averaging, 24', NEMA 3R Enclosure
A/1K-3W-D-18'-PB - ACI
Automation Field Components
1,000 Ohm (Three Wires) RTD, Duct, 18', Plastic Enclosure
TUCH2-CPF1XXXXXX-310N4C0XX - ACI
Automation Field Components
LCD, RH3%, DEG F
VOC-R - ACI
Automation Field Components
VOC, Room Mount, 0-1000 ppb,4-20 mA and 0-10 VDC, Modbus RS-485
A/AN-R2O - ACI
Automation Field Components
10,000 Ohm Thermistor (Type III), Room (R2), Override
A/LCD-RSO-420 - ACI
Automation Field Components
Loop Powered LCD, Room (R) with Setpoint and Override, 4-20mA Output