A/RH3-TTM1K-RP2-20'-4X-4 - ACI
Automation Field Components
Relative Humidity, RH Outputs: 0-5, 0-10 VDC & 4-20mA (Default), Remote Probe, 20' Plenum, NEMA 4X Enclosure, ± 3% Accuracy (NIST Cert), Transmitter w/ 1,000 Ohm RTD (NIST Cert), 4-20mA (Temp Output)
This item is temporarily out of stock.
It can be backordered right now, and we can ship it within 5 weeks.
0
144806
ACI
U.S.A.
{{CMP.TITLE}}
- Features
- Comments (0)
-
Data Sheet
A/RH3-TTM1K-RP2-20'-4X-4 - ACI
Automation Field Components
download pdfPlease contact us if you need any other document this item may have.
You can only download Technical Document (Datasheet) on this section.
The ACI Relative Humidity with Temperature Transmitter Series Remote Probe utilizes a thermoset polymer capacitive sensing element with a hydrophobic filter to deliver a proportional relative humidity analog output and can also be configured with any resistive temperature sensor such as a thermistor or RTD. The remote probe wiring harness comes in lengths of 3, 6, 10, or 20 feet to provide mounting flexibility for your remote sensing applications. Single point field calibration can be done on the humidity transmitter, by using the increment and decrement dip switches. Each toggle of the increment and decrement switches will allow for a ±0.5% RH increase or decrease. Calibration of the RH transmitters electronics can also be done using both the Zero and Span potentiometers depending on whether it is a current or voltage output device. All models feature conformally coated circuit boards to improve the reliability of the product in both high moisture and mildly corrosive atmospheres. The standard enclosure is an IP66/NEMA 4X rated moisture and corrosion resistant enclosure. A vinyl cap is provided to place over the sintered filter in applications in wash down applications to protect the sensing element from
getting moisture sprayed directly on the sensor. NIST Calibration Certificates are available for all RH TTM part series.Applications: Clean Rooms, Process Control, Environmental Chambers, Stability Chambers, Pharmaceutical Labs, Remote Sensing Applications
ACI’s RH TT Remote Probes are covered by ACI's Five (5) Year Limited Warranty. The warranty can be found in the front of ACI's Sensors & Transmitters catalog, as well as on ACI's website, www.workaci.com.
Warranty :This product is under warranty for 2 years against manufacturing and material defects from the date of invoice. The invoice for the products also stands in place of the warranty certificate, a separate document is not issued.Delivery Information :ACI branded products are imported from United States of America factory specially to order. The estimated delivery time of the products is 5 weeks. In this product group, an additional shipping and customs fee of 450EUR is charged for orders under 4,000EUR.
A/50K-INW-2.5'-GD - ACI
Automation Field Components
50,000 Ohm Thermistor, Immersion, No Well, 2.5', Galvanized Enclosure
A/10K-E1-I-2.5'-PB - ACI
Automation Field Components
10,000 Ohm (E1) Thermistor, Immersion, Welded Well, 2.5', Plastic Enclosure
A/3K-RSO-A02-C5 - ACI
Automation Field Components
3,000 Ohm Thermistor, Room (R), Setpoint, Override, 0 to 20K Ohms, Cool/Warm Sticker
A/CP-R2S-A04-G5 - ACI
Automation Field Components
10,000 Ohm Thermistor (Type II), Room (R2), Setpoint, 1051.1 to 51.1 Ohms, Blue/Red sticker
A/CP-RS-A10-D3 - ACI
Automation Field Components
10,000 Ohm Thermistor (Type II), Room (R), Setpoint, 0 to 1K Ohms, Warm/Cool Sticker
LD310 - ACI
Automation Field Components
Leak Detection Controller, Single Zone, Audible Alarm, LC-KIT
A/MLP2-001-W-U-B-C-5P - ACI
Automation Field Components
Differential Pressure, Panel Mount, 1.00 inWC, UniDirectional, +/- 0.25% FSO, 0-10VDC, 5 PT NIST
ASENSE MIII WALL - ACI
Automation Field Components
CO2/CO WALL MOUNT SNSR, W/DISP