A/RH3-TTM1K-R-4 - ACI
Automation Field Components
Relative Humidity, RH Outputs: 0-5, 0-10 VDC & 4-20mA (Default), Room (R), ± 3% Accuracy (NIST Cert), Transmitter w/ 1,000 Ohm RTD (NIST Cert), 4-20mA (Temp Output)
This item is temporarily out of stock.
It can be backordered right now, and we can ship it within 5 weeks.
0
136488
ACI
U.S.A.
{{CMP.TITLE}}
- Features
- Comments (0)
-
Data Sheet
A/RH3-TTM1K-R-4 - ACI
Automation Field Components
download pdfPlease contact us if you need any other document this item may have.
You can only download Technical Document (Datasheet) on this section.
The ACI Relative Humidity with Temperature Transmitter Room Series utilizes a thermoset polymer capacitive sensing element with a factory applied hygroscopic filter to deliver a proportional analog current or voltage output signal. The hygroscopic filter provides added resistance to moisture, dust, and other chemicals for greater long-term reliability. The RH Room transmitter features integral DIP switches for field selection of the proper output signal and supply voltage to meet your applications requirements. Each unit also contains 0%, 50%, and 100% test options to verify that the transmitter is both working and wired properly. Field calibration can be performed by using the increment and decrement calibration DIP switches without the need to replace the sensing element. These enhancements provide increased flexibility and outstanding long-term reliability. The temperature transmitter must be powered with 13.5 to 24 VDC power source and can be ordered as either a two-wire 4-20 mA or 3-wire voltage output sensor. The temperature transmitter is installed on the back of the enclosure and must be mounted over a single gang junction box in the wall. There are two styling options in this series which should satisfy most commercial decors. Both styles feature four-way air‑ow to minimize self-heating. NIST Calibration Certificates are available for all RH TTM part series.
Warranty :This product is under warranty for 2 years against manufacturing and material defects from the date of invoice. The invoice for the products also stands in place of the warranty certificate, a separate document is not issued.Delivery Information :ACI branded products are imported from United States of America factory specially to order. The estimated delivery time of the products is 5 weeks. In this product group, an additional shipping and customs fee of 450EUR is charged for orders under 4,000EUR.
A/1K-2W-D-4'-GD - ACI
Automation Field Components
1,000 Ohm (Two Wires) RTD, Duct, 4', Galvanized Enclosure
A/RH3-1K-2W-RP2-20'-EH - ACI
Automation Field Components
Relative Humidity, RH Outputs: 0-5, 0-10 VDC & 4-20mA (Default), Remote Probe, ± 3% Accuracy, 1,000 Ohm RTD (Two Wires), 20' Plenum
A/TUC2-0-5V-0005 - ACI
Automation Field Components
0-5VDC Output, Setpoint, LCD
QTS-61211X-E000000 - ACI
Automation Field Components
Toxic Gas Sensor, Hydrogen, 0-2000 PPM, 4-20mA Output loop powered, Industrial NEMA 4X, Aluminum Sensor Housing
RN (240-730) - ACI
Automation Field Components
Resistor Network (240 to 730 Ohms)
A/3K-AP - ACI
Automation Field Components
3,000 Ohm Thermistor, Wall Plate, Aluminum
A/RH1-100-3W-R - ACI
Automation Field Components
Relative Humidity, RH Outputs: 0-5, 0-10 VDC & 4-20mA (Default), Room (R), ± 1% Accuracy, 100 Ohm RTD (Three Wires)
A/1K-2W-BBS - ACI
Automation Field Components
1,000 Ohm (Two Wires) RTD, Flush Mount Button, Brass