A/RH1-O-NIST - ACI
Automation Field Components
Relative Humidity, RH Outputs: 0-5, 0-10 VDC & 4-20mA (Default), Outside Air, ± 1% Accuracy, Euro Enclosure, NIST
This item is temporarily out of stock.
It can be backordered right now, and we can ship it within 5 weeks.
0
148185
ACI
U.S.A.
{{CMP.TITLE}}
- Features
- Comments (0)
-
Data Sheet
A/RH1-O-NIST - ACI
Automation Field Components
download pdfPlease contact us if you need any other document this item may have.
You can only download Technical Document (Datasheet) on this section.
The ACI Relative Humidity Outside Air utilizes a thermoset polymer capacitive sensing element with factory applied hydrophobic filter to deliver a proportional analog current or voltage output signal. The hydrophobic filter provides added resistance to moisture, dust, and other chemicals for greater long term reliability. The RH Outside Air transmitter features integral DIP switches for field selection of the proper output signal and supply voltage to meet your applications requirements. Each unit also contains 0%, 50%, and 100% test options to verify that the transmitter is both working and wired properly. Field calibration also can be performed by using the increment and decrement calibration DIP switches without the need to replace the sensing element. These enhancements provide increased flexibility and outstanding long-term reliability. Outside Air configurations feature a weatherproof Euro style enclosure with gasketed cover and conformally coated circuit boards for added moisture and chemical resistance. Three and Five-point NIST Calibration Certificates are available upon request but they must be ordered separately.
Applications: Monitor Outdoor Air Humidity, Economizer Control, Psychrometric calculations such as Enthalpy and Dew point, Wash down Applications
The ACI RH Outside Air is covered by ACI's Five (5) Year Limited Warranty. The warranty can be found in the front of ACI's Sensors & Transmitters catalog, as well as on ACI's website, www.workaci.com.
Warranty :This product is under warranty for 2 years against manufacturing and material defects from the date of invoice. The invoice for the products also stands in place of the warranty certificate, a separate document is not issued.Delivery Information :The stock quantity information reported in the product details is up to date. Products in stock can be shipped immediately. Products that are not in stock and whose delivery time is separately reported are shipped when the supply period is completed.
A/BALCO-INW-4'-BB - ACI
Automation Field Components
1,000 Ohm Balco RTD, Immersion, No Well, 4', NEMA 3R Enclosure
A/AN-INW-4'-4X - ACI
Automation Field Components
10,000 Ohm Thermistor (Type III), Immersion, No Well, 4', NEMA 4X Enclosure
A/RH2-CP-R2SO-A04-G5 - ACI
Automation Field Components
Relative Humidity, RH Outputs: 0-5, 0-10 VDC & 4-20mA (Default), Room (R2), ± 2% Accuracy, 10,000 Ohm Thermistor (Type II), w/ Setpoint 1051.1 to 51.1 ohms, and Override, Blue/Red Sticker
A/RH3-AN-RS-A02-C5 - ACI
Automation Field Components
Relative Humidity, RH Outputs: 0-5, 0-10 VDC & 4-20mA (Default), Room (R), ± 3% Accuracy, 10,000 Ohm Thermistor (Type III), Setpoint:0-10K
A/TUC2-CP-0099 - ACI
Automation Field Components
10,000 Ohm Thermistor (Type II), Setpoint, LCD
A/1K-NI-FA-8'-GD - ACI
Automation Field Components
1,000 Ohm Nickel RTD, Flexible Cable Averaging, 8', Galvanized Enclosure
RN (0-15K) - ACI
Automation Field Components
Resistor Network (0 to 15k Ohms)
A/3K-S-PB - ACI
Automation Field Components
3,000 Ohm Thermistor, Strap On, Plastic Enclosure