A/PS24-5V-S - ACI
Automation Field Components
5VDC Adjustable Power Supply w/Snap Track
This item is temporarily out of stock.
It can be backordered right now, and we can ship it within 5 weeks.
0
147642
ACI
U.S.A.
{{CMP.TITLE}}
- Features
- Comments (0)
-
Data Sheet
A/PS24-5V-S - ACI
Automation Field Components
download pdfPlease contact us if you need any other document this item may have.
You can only download Technical Document (Datasheet) on this section.
The PS24 Series low voltage power supplies will accept a 24 VAC input voltage from a Class 2 transformer and convert it into an adjustable 1.5 to 26 VDC regulated output voltage. The PS24 is able to be configured in either Half or Full Wave mode by using the integral jumper shunt selection switches. An onboard potentiometer is available to allow for field adjustment of the 24 VDC factory set voltage to any voltage from 1.5 to 26 VDC. The standard unit is shipped in a standard snap track mounting configuration to allow for easy mounting inside of your electrical panel or piece of equipment. In applications where a Pilot Duty or remote relay is required, the A/DO008 transorb can be placed across the coil of the relay to snub electrical spikes when the relays are de-energized. An external transorb may not be required if the relay and PS24 power supply is mounted within the same control panel.
Applications: DC Power Supply, Transducer Supply, Test Bench Supply, Analog Signal Simulator, DC Power Regulation from Control Transformer.
The ACI PS24 is covered by ACI's Two (2) Year Limited Warranty. The warranty can be found in the front of ACI's Sensors & Transmitters catalog, as well as on ACI's website, Www.Workaci.Com.
Warranty :This product is under warranty for 2 years against manufacturing and material defects from the date of invoice. The invoice for the products also stands in place of the warranty certificate, a separate document is not issued.Delivery Information :The stock quantity information reported in the product details is up to date. Products in stock can be shipped immediately. Products that are not in stock and whose delivery time is separately reported are shipped when the supply period is completed.
A/1.8K-I-2.5'-4X - ACI
Automation Field Components
1,800 Ohm Thermistor, immersion, Welded Well, 2.5', NEMA 4X Enclosure
A/100-3W-INW-2.5'-BB - ACI
Automation Field Components
100 Ohm (Three Wires) RTD, Immersion, No Well, 2.5', NEMA 3R Enclosure
A/100-2W-D-12'-PB - ACI
Automation Field Components
100 Ohm (Two Wires) RTD, Duct, 12', Plastic Enclosure
A/CP-RS-RJ4-LCD-F-A04-A0 - ACI
Automation Field Components
10,000 Ohm Thermistor (Type II), Room (R), Setpoint, RJ4, LCD
A/DLP-D25-W-B-D-B-2-C-0P-S - ACI
Automation Field Components
Differential Low Pressure, 0.25 inWC, Bidirectional, LCD, 0.25% Accuracy, w/ Din Rail, 0-10VDC Output, No Nist, Standard
A/RH1-CP-O - ACI
Automation Field Components
Relative Humidity, RH Outputs: 0-5, 0-10 VDC & 4-20mA (Default), Outside Air, ± 1% Accuracy, 10,000 Ohm Thermistor (Type II), Euro Enclosure
FS-3 - ACI
Automation Field Components
Freeze Stat, 10' Capillary, Manual Reset, (1) SPDT
ARM2 - ACI
Automation Field Components
Analog Input(VDC), Dual Analog Output (mA), Analog Rescaling Module (Signal Splitter)