A/MSCS-A - ACI
Automation Field Components
Mini, Adjustable Current Switch, Split Core, NO, 0.70 to 150A Range, Trip Point
This item is temporarily out of stock.
It can be backordered right now, and we can ship it within 5 weeks.
0
117855
ACI
U.S.A.
{{CMP.TITLE}}
- Features
- Comments (0)
-
Data Sheet
A/MSCS-A - ACI
Automation Field Components
download pdfPlease contact us if you need any other document this item may have.
You can only download Technical Document (Datasheet) on this section.
The A/MCS-A and A/MSCS-A are N/O solid state adjustable current switches. These switches are small in stature, allowing for tight installations. They are ideal for providing status information on any equipment that uses AC current. Outputs are non-polarity sensitive, N/O solid-state contacts for switching both AC and DC circuits up to 36 volts. Units also include two Status LED indicators, which will signal three states: tripped on, current present but below trip point, and current off or below the low end of the adjustable trip point range. A change in current may indicate motor failure, belt loss/slippage, or mechanical failure. In any of these events, the current can significantly increase or decrease, thus tripping the current switch and immediately notifying the Building Management System of the failure or problem. The A/MCS-A and A/MSCS-A Series are covered by ACI's Five (5) Year Limited Warranty.
Warranty :This product is under warranty for 2 years against manufacturing and material defects from the date of invoice. The invoice for the products also stands in place of the warranty certificate, a separate document is not issued.Delivery Information :ACI branded products are imported from United States of America factory specially to order. The estimated delivery time of the products is 5 weeks. In this product group, an additional shipping and customs fee of 450EUR is charged for orders under 4,000EUR.
A/TT100-HT-D-12'-4-GD - ACI
Automation Field Components
Transmitter w/ 100 Ohm RTD, High Temperature Duct, 12' 316 SS, Galvanized Enclosure, 4-20mA Output
A/AN-RSO-A16-C5 - ACI
Automation Field Components
10,000 Ohm Thermistor (Type III), Room (R), Setpoint 0 to 5K Ohms, Override, Cool/Warm Sticker
A/TB-8.5-3-XXX - ACI
Automation Field Components
Empty 8.5 oz Nalgene Bottle, 3 Sensing Points, Mounting Bracket, Rated to -100ºC
A/1K-2W-S-GD-NIST - ACI
Automation Field Components
1,000 Ohm (Two Wires) RTD, Strap On, Galvanized Enclosure, NIST Cert
A/10K-E1-A-24'-4X - ACI
Automation Field Components
10,000 Ohm (E1) Thermistor, Copper Averaging, 24', NEMA 4X Enclosure
85930-018-096 - ACI
Automation Field Components
Smart Sensor Replacement, Arsine, 0-1 ppm
PTA-PPM - ACI
Automation Field Components
Pulse Width Modulate Input (60ppm), Analog Output (Selectable), (100, 1500, or 3000 Pulses/Min Selectable), Water Flow Meter Pulse
RN (0-40K) - ACI
Automation Field Components
Resistor Network (0 to 40K Ohms)