A/ENT-CTRL - ACI
Automation Field Components
Enthalpy, Enthalpy Changeover Control, Outdoor Adjustable Trip Point, 24 VAC Form 1C Relay Contact
This item is temporarily out of stock.
It can be backordered right now, and we can ship it within 5 weeks.
0
122440
ACI
U.S.A.
{{CMP.TITLE}}
- Features
- Comments (0)
-
Data Sheet
A/ENT-CTRL - ACI
Automation Field Components
download pdfPlease contact us if you need any other document this item may have.
You can only download Technical Document (Datasheet) on this section.
The A/ENT-CTRL is an enthalpy controller which is used to measure temperature and humidity before converting them into a sourced relay output. The supply voltage to the A/ENT-CTRL is common to both the N/O or N/C contacts of the 10A Form 1C Relay. (The A/ENT-CTRL-F1C's output acts as a dry contact rather than sourcing the supply voltage). Each unit in this series features a coated circuit board and jumper selectable elevation setting. The A/ENT-CTRL is covered by ACI's Five (5) Year Limited Warranty.
Warranty :This product is under warranty for 2 years against manufacturing and material defects from the date of invoice. The invoice for the products also stands in place of the warranty certificate, a separate document is not issued.Delivery Information :ACI branded products are imported from United States of America factory specially to order. The estimated delivery time of the products is 5 weeks. In this product group, an additional shipping and customs fee of 450EUR is charged for orders under 4,000EUR.
A/0.1AN-D-8'-PB - ACI
Automation Field Components
High Accuracy 10,000 Ohm Thermistor (Type III), Duct, 8', Plastic Enclosure
A/1K-NI-IM-4'-GD - ACI
Automation Field Components
1,000 Ohm Nickel RTD, Immersion, Machined Well, 4', Galvanized Enclosure
A/100-3W-D-4'-4X - ACI
Automation Field Components
100 Ohm (Three Wires) RTD, Duct, 4', NEMA 4X Enclosure
TUC2-16-F2-1J-G0-C-L-X-X - ACI
Automation Field Components
4-20mA Output, Setpoint, w/ Override, LCD
A/RH3-TT100-D-BB-2 - ACI
Automation Field Components
Relative Humidity, RH Outputs: 0-5, 0-10 VDC & 4-20mA (Default), Duct, ± 5% Accuracy, Transmitter w/ 100 Ohm RTD, NEMA 3R Enclosure, 2-10VDC (Temp)
A/TUCH2-4-20MA-0043 - ACI
Automation Field Components
LCD, RH3%, SET, DEG C
A/1K-NI-FA-12'-GD - ACI
Automation Field Components
1,000 Ohm Nickel RTD, Flexibe Cable Averaging, 12', Galvanized Enclosure
A/TUCH2-CP-0013 - ACI
Automation Field Components
LCD, RH3%, SET, O/R, DEG F