A/DIFF-ENT - ACI
Automation Field Components
Enthalpy, Differential Enthalpy Changeover Control, Indoor vs Outdoor, 24 VAC Form 1C Relay Contact
This item is temporarily out of stock.
It can be backordered right now, and we can ship it within 5 weeks.
0
122426
ACI
U.S.A.
{{CMP.TITLE}}
- Features
- Comments (0)
-
Data Sheet
A/DIFF-ENT - ACI
Automation Field Components
download pdfPlease contact us if you need any other document this item may have.
You can only download Technical Document (Datasheet) on this section.
The A/DIFF-ENT is an enthalpy controller which measures and converts temperature and humidity into a sources relay output. The supply voltage to the A/DIFF-ENT is common to both the N/O or N/C contacts of the 10A Form 1C Relay. Typically used in conjunction with the A/DIFF-ENT, the A/ENT converts a capacitive type humidity sensor into a linear 2-wire, 4 to 20 mA output. Its signal is proportional to a scale of 0 to 50 BTU's and is geared towards OEMs of economizers and other devices that require an enthalpy input, or economizer control. Each unit in this series features a conformally coated circuit board and jumper selectable elevation setting. The A/DIFF-ENT is covered by ACI's Five (5) Year Limited Warranty.
Warranty :This product is under warranty for 2 years against manufacturing and material defects from the date of invoice. The invoice for the products also stands in place of the warranty certificate, a separate document is not issued.Delivery Information :ACI branded products are imported from United States of America factory specially to order. The estimated delivery time of the products is 5 weeks. In this product group, an additional shipping and customs fee of 450EUR is charged for orders under 4,000EUR.
A/AN-BC-D-4'-4X - ACI
Automation Field Components
10,000 Ohm Thermistor w/11K Shunt, Duct, 4', NEMA 4X Enclosure
A/1K-2W-RA-24'-4X - ACI
Automation Field Components
1,000 Ohm (Two Wires) RTD, Rigid Probe Averaging, 24', NEMA 4X Enclosure
A/1.8K-D-6'-GD - ACI
Automation Field Components
1,800 Ohm Thermistor, Duct, 6', Galvanized Enclosure
A/20K-R2S-A24-G5 - ACI
Automation Field Components
20,000 Ohm Thermistor, Room (R2), Setpoint 9.5K to 1K, Blue/Red Sticker
A/TUC2-AN-0086 - ACI
Automation Field Components
10,000 Ohm Thermistor (Type III), Setpoint, LCD
A/TT1K-R2SO-4-G5 - ACI
Automation Field Components
Transmitter w/ 1,000 Ohm RTD, Room (R2) w/ Setpoint and Override, 4-20mA Output
A/RH3-R2 - ACI
Automation Field Components
Relative Humidity, RH Outputs: 0-5, 0-10 VDC & 4-20mA (Default), Room (R2), ± 3% Accuracy
A/TT100-LTS-4-GD-10' - ACI
Automation Field Components
Transmitter w/ 100 Ohm RTD, 2" Freezer Probe 316SS, Galvanized Enclosure, 10', 4-20mA Output