A/CP-INW-4'-PB - ACI
Automation Field Components
10,000 Ohm Thermistor (Type II), Immersion, No Well, 4', Plastic Enclosure
This item is temporarily out of stock.
It can be backordered right now, and we can ship it within 5 weeks.
0
122083
ACI
U.S.A.
{{CMP.TITLE}}
- Features
- Comments (0)
-
Data Sheet
A/CP-INW-4'-PB - ACI
Automation Field Components
download pdfPlease contact us if you need any other document this item may have.
You can only download Technical Document (Datasheet) on this section.
The plastic box, immersion no well configuration has male 1/2 inch NPT threads. The sensing element is double encapsulated to avoid sensor failures caused by moisture infiltration. ACI also standardizes with etched Teflon lead wires and wells must be ordered separately for this part. Please note that the PB enclosure is rated to 203 degrees Fahrenheit. ACI immersion temperature sensors are designed for HVAC, Building Automation Systems, and light industrial applications. Specific applications include: chillers, hot water systems, tanks, and boilers. NOTE: Welded thermowells are not intended for moving water or high pressure service. Fluid velocity and wake frequency are primary factors in well failure. Machined thermowells should be used in these types of applications.
- Negative temperature coefficient
- Double encapsulated sensor
- Easy open / close latch system (no screws)
Warranty :This product is under warranty for 2 years against manufacturing and material defects from the date of invoice. The invoice for the products also stands in place of the warranty certificate, a separate document is not issued.Delivery Information :ACI branded products are imported from United States of America factory specially to order. The estimated delivery time of the products is 5 weeks. In this product group, an additional shipping and customs fee of 450EUR is charged for orders under 4,000EUR.
A/CP-IM-6'-GD - ACI
Automation Field Components
10,000 Ohm Thermistor (Type II), Immersion, Machined Well, 6', Galvanized Enclosure
A/1K-3W-D-12'-PB - ACI
Automation Field Components
1,000 Ohm (Three Wires) RTD, Duct, 12', Plastic Enclosure
A/TT1K-D-4'-2-PB - ACI
Automation Field Components
Transmitter w/ 1,000 Ohm RTD, Duct, 4', Plastic Enclosure, 2-10VDC Output
A/20K-RSO-232-A24-B4 - ACI
Automation Field Components
20,000 Ohm Thermistor, Room (R), Setpoint 9.5K-1K, Override, RS232, 55-85 sticker
A/CO2-R2S-AN-A03-G5 - ACI
Automation Field Components
Carbon Dioxide Sensor, Room, 0-2000 PPM (0-5V, 0-10V, 4-20mA), Temp (10K Type III), Setpoint 0 to 10K, Blue/Red sticker
A/CSI-A-50'-GD - ACI
Automation Field Components
10,000 Ohm (CSI) Thermistor, Copper Averaging, 50', Galvanized Enclosure
A/RH3-10KS-R - ACI
Automation Field Components
Relative Humidity, RH Outputs: 0-5, 0-10 VDC & 4-20mA (Default), Room (R), ± 3% Accuracy, 10,000 Ohm Thermistor
LE119 - ACI
Automation Field Components
Transformer, LE Series, PV:120 VAC, SV:24 VAC, VA:75, HUB: 1TF, Manual Reset