A/CP-IM-4'-BB - ACI
Automation Field Components
10,000 Ohm Thermistor (Type II), Immersion, Machined Well, 4', NEMA 3R Enclosure
This item is temporarily out of stock.
It can be backordered right now, and we can ship it within 5 weeks.
0
137073
ACI
U.S.A.
{{CMP.TITLE}}
- Features
- Comments (0)
-
Data Sheet
A/CP-IM-4'-BB - ACI
Automation Field Components
download pdfPlease contact us if you need any other document this item may have.
You can only download Technical Document (Datasheet) on this section.
The ACI Thermistor Immersion Series features a ¼” diameter stainless steel probe with two, 14” 22 AWG Etched Teflon colored lead wires depending on the probe length ordered to differentiate the sensor types. The sensors in this series are manufactured using ACI’s proven double encapsulation process to eliminate the effects of moisture and to increase the response times using our high quality, thermally conductive epoxy. Optional NEMA/IP rated enclosures and NIST certificates are available the back of the product data sheet. ACI’s Machined Thermowells are used with temperature instruments in process systems where gas or liquid medias are used to provide a degree of protection for the sensing element when installed inside of a pipe, tank, or piece of equipment. The thermowell provides easy access for NIST Certified applications and enables users to easily replace the sensor without having to drain the entire system. Thermowells also protect the small diameter sensing probes from stresses created by high temperatures and pressures, corrosive environments, or the flow of gas or liquid medias through pipes or equipment. It is recommended to follow a Wake Frequency calculator using the ASME PTC 19.3 TW-2016 standard to help prevent vibrational destruction from damaging the thermowell. ACI’s standard thermowells are made of 304 stainless steel which ensures long lasting reliability and corrosion resistance. Optional 316 Stainless Steel is available for use in applications where higher corrosion resistance is required. This series is machined from solid bar stock to precision tolerances which provides maximum heat transfer when used with a corresponding ACI sensor. When necessary, thermal grease is available from ACI to improve the sensor’s response time. Insertion depth should be long enough to permit the entire temperature-sensitive section of the temperature probe to project into the medium being monitored, thus maximizing measurement accuracy.
Warranty :This product is under warranty for 2 years against manufacturing and material defects from the date of invoice. The invoice for the products also stands in place of the warranty certificate, a separate document is not issued.Delivery Information :ACI branded products are imported from United States of America factory specially to order. The estimated delivery time of the products is 5 weeks. In this product group, an additional shipping and customs fee of 450EUR is charged for orders under 4,000EUR.
A/TT1K-HT-INW-4'-2-BB - ACI
Automation Field Components
Transmitter w/ 1,000 Ohm RTD, High Temperature Immersion, No Well, 4', NEMA 3R Enclosure, 2-10VDC Output
A/AN-DO-12' - ACI
Automation Field Components
10,000 Ohm Thermistor (Type III), Duct, Without Box, 12'
A/DLP-002-W-U-N-B-0-C-5P-S - ACI
Automation Field Components
Differential Low Pressure, 2 inWC, Unidirectional, No Display, 0.25% Accuracy, No Pitot Tube, 0-10VDC Output, 5 Point Nist, Standard
F10675PA - ACI
Automation Field Components
5 PPM NITROGEN DIOXIDE, 34 LITERS
ACUCT-200R-400:333 - ACI
Automation Field Components
Current Transformer, 400A, High Accuracy, Split Core, 2.0" Aperture, 333mV Output, 2.5m Leads
A/TUC2-4-20MA-0023 - ACI
Automation Field Components
4-20mA Output, Setpoint, LCD
A/RH2-R-LCD-420 - ACI
Automation Field Components
Relative Humidity, Room, Humidity with LCD, ± 2% Accuracy, 4-20mA
LE120 - ACI
Automation Field Components
Transformer, LE Series, PV:120 VAC, SV:24 VAC, VA:96, HUB: 2TF, Manual Reset