A/BALCO-INW-4'-GD - ACI
Automation Field Components
1,000 Ohm Balco RTD, Immersion, No Well, 4', Galvanized Enclosure
This item is temporarily out of stock.
It can be backordered right now, and we can ship it within 5 weeks.
0
123343
ACI
U.S.A.
{{CMP.TITLE}}
- Features
- Comments (0)
-
Data Sheet
A/BALCO-INW-4'-GD - ACI
Automation Field Components
download pdfPlease contact us if you need any other document this item may have.
You can only download Technical Document (Datasheet) on this section.
The galvanized metal box, no well configuration has male 1/2 inch NPT threads. The sensing element is double encapsulated to avoid sensor failures caused by moisture infiltration. ACI also standardizes with etched Teflon lead wires and wells must be ordered separately for this part. ACI immersion temperature sensors are designed for HVAC, Building Automation Systems, and light industrial applications. Specific applications include: chillers, hot water systems, tanks, and boilers. NOTE: Welded thermowells are not intended for moving water or high pressure service. Fluid velocity and wake frequency are primary factors in well failure. Machined thermowells should be used in these types of applications.
- Negative temperature coefficient
- Double encapsulated sensor
- Foam pad
Warranty :This product is under warranty for 2 years against manufacturing and material defects from the date of invoice. The invoice for the products also stands in place of the warranty certificate, a separate document is not issued.Delivery Information :ACI branded products are imported from United States of America factory specially to order. The estimated delivery time of the products is 5 weeks. In this product group, an additional shipping and customs fee of 450EUR is charged for orders under 4,000EUR.
A/10KS-INW-2.5'-BB - ACI
Automation Field Components
10,000 Ohm Thermistor, Immersion, No Well, 2.5', NEMA 3R Enclosure
A/TT100-INW-6'-2-GD - ACI
Automation Field Components
Transmitter w/ 100 Ohm RTD, Immersion, No Well, 6', Galvanized Enclosure, 2-10VDC Output
A/M6' - ACI
Automation Field Components
6' Thermowell, 1/2 NPT, 304 SS Machined
A/AN-FRZ2'-30' - ACI
Automation Field Components
10,000 Ohm Thermistor (Type III), 2' Freezer Probe 316SS, 30'
A/1K-2W-I-6'-BB - ACI
Automation Field Components
1,000 Ohm (Two Wires) RTD, Immersion, Welded Well, 6', NEMA 3R Enclosure
A/WPR2-300-M10 - ACI
Automation Field Components
Wet Differential Pressure, 0-30, 0-75, 0-150, 0-300 PSID (Default), 10' Metal Clad Cables, Outputs: 0-10 VDC (Default), 0-5 VDC, 4-20mA (Selectable)
A/SINTERED FILTER - ACI
Automation Field Components
SINTERED FILTER FOR RH
RN (100-1100) - ACI
Automation Field Components
Resistor Network (100 to 1100 Ohms)