A/BALCO-BP-10'CL2P - ACI
Automation Field Components
1,000 Ohm Balco RTD, Bullet Probe, 1", 10' Plenum Cable
This item is temporarily out of stock.
It can be backordered right now, and we can ship it within 5 weeks.
0
142712
ACI
U.S.A.
{{CMP.TITLE}}
- Features
- Comments (0)
-
Data Sheet
A/BALCO-BP-10'CL2P - ACI
Automation Field Components
download pdfPlease contact us if you need any other document this item may have.
You can only download Technical Document (Datasheet) on this section.
The ACI Balco Bullet Probe Series features a one inch stainless steel probe with two, 24 inch 22 AWG Etched Teflon colored lead wires to differentiate the sensor types. The sensors in this series are manufactured using ACI’s proven double encapsulation process to eliminate the effects of moisture upon the sensors and to increase the thermal response times using our high quality, thermally conductive epoxy. The bullet style sensor is designed to be used to monitor air temperatures and should not be fully submerged in water. This series can be ordered with different wire options and NIST Certification as referenced in the Ordering grid on the back of the product data sheet.
Applications: Roof Top Units, Air Handlers, Discharge Air/Supply/Return/Mixed Air Duct Temperature, Remote Temperature Sensing
Warranty :This product is under warranty for 2 years against manufacturing and material defects from the date of invoice. The invoice for the products also stands in place of the warranty certificate, a separate document is not issued.Delivery Information :ACI branded products are imported from United States of America factory specially to order. The estimated delivery time of the products is 5 weeks. In this product group, an additional shipping and customs fee of 450EUR is charged for orders under 4,000EUR.
A/CP-PO-4'-20'CL2P-HS - ACI
Automation Field Components
10,000 Ohm Thermistor (Type II), Probe Only, 4', 20' Plenum Cable, w/ Adhesive Heat Shrink
A/1/4' TO 1/8' REDUCER - ACI
Automation Field Components
SS, 1/4' FNPT TO 1/8' MNPT
A/TT1K-I-2.5'-1-4X - ACI
Automation Field Components
Transmitter w/ 1,000 Ohm RTD, Immersion, Welded Well, 2.5', NEMA 4X Enclosure, 1-5VDC Output
A/AN-R2SO-A38-D3 - ACI
Automation Field Components
10,000 Ohm Thermistor (Type III), Room (R2), Setpoint 20K to 0 Ohms, Override, Warm/Cool Sticker
A/TUC2-CP-0176 - ACI
Automation Field Components
10,000 Ohm Thermistor (Type II), Setpoint, LCD
A/TUCH2-1K NI-0038 - ACI
Automation Field Components
LCD, RH3%, SET, DEG F
A/TUC2-4-20MA-0025 - ACI
Automation Field Components
4-20mA Output, Setpoint, w/ Override, LCD
A/RH1-TT100-R-4 - ACI
Automation Field Components
Relative Humidity, RH Outputs: 0-5, 0-10 VDC & 4-20mA (Default), Room (R), ± 1% Accuracy, Transmitter w/ 100 Ohm RTD, 4-20mA (Temp Output)