A/20K-INW-2.5'-PB - ACI
Automation Field Components
20,000 Ohm Thermistor, Immersion, No Well, 2.5', Plastic Enclosure
This item is temporarily out of stock.
It can be backordered right now, and we can ship it within 5 weeks.
0
120641
ACI
U.S.A.
{{CMP.TITLE}}
- Features
- Comments (0)
-
Data Sheet
A/20K-INW-2.5'-PB - ACI
Automation Field Components
download pdfPlease contact us if you need any other document this item may have.
You can only download Technical Document (Datasheet) on this section.
The plastic box, immersion no well configuration has male 1/2 inch NPT threads. The sensing element is double encapsulated to avoid sensor failures caused by moisture infiltration. ACI also standardizes with etched Teflon lead wires and wells must be ordered separately for this part. Please note that the PB enclosure is rated to 203 degrees Fahrenheit. ACI immersion temperature sensors are designed for HVAC, Building Automation Systems, and light industrial applications. Specific applications include: chillers, hot water systems, tanks, and boilers. NOTE: Welded thermowells are not intended for moving water or high pressure service. Fluid velocity and wake frequency are primary factors in well failure. Machined thermowells should be used in these types of applications.
- Negative temperature coefficient
- Double encapsulated sensor
- Easy open / close latch system (no screws)
Warranty :This product is under warranty for 2 years against manufacturing and material defects from the date of invoice. The invoice for the products also stands in place of the warranty certificate, a separate document is not issued.Delivery Information :The stock quantity information reported in the product details is up to date. Products in stock can be shipped immediately. Products that are not in stock and whose delivery time is separately reported are shipped when the supply period is completed.
A/AN-D-6'-PB - ACI
Automation Field Components
10,000 Ohm Thermistor (Type III), Duct, 6', Plastic Enclosure
A/100-3W-INW-4'-4X - ACI
Automation Field Components
100 Ohm (Three Wires) RTD, Immersion, No Well, 4', NEMA 4X Enclosure
A/1K-NI-SP-NIST - ACI
Automation Field Components
1,000 Ohm Nickel RTD, Wall Plate, Stainless Steel, NIST Cert
Q6-CO/CH4-100L - ACI
Automation Field Components
Smart Sensor, Combination, Main: CO 0-250 ppm, Remote: CH4, 0-100% LEL, 3 SPDT Relays, NEMA 4X, Modbus RTU
A/RH2-TTM1K-RP2-20'-4X-2 - ACI
Automation Field Components
Relative Humidity, RH Outputs: 0-5, 0-10 VDC & 4-20mA (Default), Remote Probe, 20' Plenum, NEMA 4X Enclosure, ± 2% Accuracy (NIST Cert), Transmitter w/ 1,000 Ohm RTD (NIST Cert), 2-10VDC (Temp Output)
A/TT1K-O-1-EH - ACI
Automation Field Components
Transmitter w/ 1,000 Ohm RTD, Outside Air, Euro Enclosure, 1-5VDC Output
RN (0-10K) - ACI
Automation Field Components
Resistor Network (0 to 10k Ohms)
AFS-262 - ACI
Automation Field Components
Differential Pressure Switch, 0.05 to 2.0 inWC, SPDT, Auto Reset, Compression Fitting