A/1K-3W-D-18'-4X - ACI
Otomasyon Saha Ekipmanları
1,000 Ohm (Three Wires) RTD, Duct, 18', NEMA 4X Enclosure
Bu ürün şu anda stokta bulunmuyor.
Ürünü hemen şimdi satın alabilirsiniz ve 5 hafta içerisinde tarafınıza sevkini gerçekleştirebiliriz.
0
138193
ACI
ABD
{{CMP.TITLE}}
Bu ürünü Havale/EFT yöntemi ile ödemelerde %2 indirim, Kredi kartı ile ödemelerde 9 aya varan taksit seçeneklerini değerlendirebilirsiniz. |
- Ürün Özellikleri
- Ödeme Seçenekleri
- Yorumlar (0)
-
Data Sheet | Teknik Doküman
A/1K-3W-D-18'-4X - ACI
Otomasyon Saha Ekipmanları
pdf indirBu ürünün sahip olabileceği farklı bir doküman ihtiyacınız var ise lütfen bizimle iletişime geçiniz.
Bu bölümden sadece ürüne ait teknik verileri içeren Teknik Dokümanı (Datasheet) indirebilirsiniz.
The ACI Platinum Duct Series features a stainless steel probe with Etched Teflon colored lead wires to differentiate the different sensor types. The three-wire “-3W” option should be ordered when using with a 3-Wire temperature transmitter or sensor configuration on your building management system or PLC (Programmable Logic Controller). The purpose of the 3rd wire is to compensate for external lead wire resistance that will affect the accuracy of your sensor output. ACI recommends the use of an 18 AWG lead wires to reduce the external lead wire resistance when using a Platinum RTD. The sensors are manufactured using ACI’s proven double encapsulation process to eliminate the effects of moisture on the sensors and to increase response times using our high quality, thermally conductive epoxy. The duct style sensor is a single point sensor designed to be used in smaller duct applications and includes an insulation pad for sealing the duct and dampening vibration. The sensor length should be determined by the width or diameter of your duct, such that the tip of the probe is in the approximate center of the duct. Standard enclosure options include the “-GD” Galvanized or “-PB” plastic enclosure with hinged cover. On larger ducts, our Rigid or Bendable Copper Averaging sensor may offer better coverage based upon the size of your duct system and sensor location. Optional NEMA/IP rated weather proof enclosures and NIST Certificates are available as referenced in the ordering grid. Applications: Roof Top Units, Air Handlers, Monitoring Supply/Discharge/Return/Mixed Air Temperatures The ACI Platinum Duct Series is covered by ACI's Five (5) Year Limited Warranty. The warranty can be found in the front of ACI's Sensors & Transmitters catalog, as well as on ACI's website, www.workaci.com.
Garanti Bilgisi :Bu ürün fatura tarihi itibari ile imalat ve malzeme hatalarına karşı 2 yıl süresince garanti kapsamındadır. Ürünler için fatura garanti belgesi yerine geçer, ayrı bir belge düzenlenmemektedir.Teslimat Bilgisi :Bilgiler kısmında ürünlerin stok adetleri paylaşılmaktadır. Stokta bulunan ürünler aynı gün sevk edilir. Stokta olmayan ürünler belirtilen süre zarfında temin edilir.
A/1K-NI-PO-2' - ACI
Otomasyon Saha Ekipmanları
1,000 Ohm Nickel RTD, Probe Only, 2'
A/100-2W-INW-2.5'-GD - ACI
Otomasyon Saha Ekipmanları
100 Ohm (Two Wires) RTD, Immersion, No Well, 2.5', Galvanized Enclosure
A/ULT-001-BB-06-TB852 - ACI
Otomasyon Saha Ekipmanları
Transmitter w/1,000 Ohm RTD, Low Temperature 2" Probe, 316SS, 6' Plenum Cable, BB, 4-20mA, 8.5 oz Bottle w/ Glass Beads (Two Sensor Wells), NIST Cert
A/MLP2-002-W-B-B-A-0P - ACI
Otomasyon Saha Ekipmanları
Differential Pressure, Panel Mount, 2.00 inWC, BiDirectional, +/- 0.25% FSO, 4-20mA
A/RH3-TT1K-R-1 - ACI
Otomasyon Saha Ekipmanları
Relative Humidity, RH Outputs: 0-5, 0-10 VDC & 4-20mA (Default), Room (R), ± 3% Accuracy, Transmitter w/ 1,000 Ohm RTD, 1-5VDC (Temp)
TUC2-16-F4-1E-G0-X-X-X-X - ACI
Otomasyon Saha Ekipmanları
4-20mA Output, Setpoint, LCD
A/AN-FA-24'-PB - ACI
Otomasyon Saha Ekipmanları
10,000 Ohm Thermistor (Type III), Flexible Cable Averaging, 24', Plastic Enclosure
A/CSI-O-4X - ACI
Otomasyon Saha Ekipmanları
10,000 Ohm (CSI) Thermistor, Outside Air, NEMA 4X Enclosure