A/1K-2W-PO-18” - ACI
Automation Field Components
1,000 Ohm (Two Wires) RTD, Probe Only, 18"
This item is temporarily out of stock.
It can be backordered right now, and we can ship it within 5 weeks.
0
146401
ACI
U.S.A.
{{CMP.TITLE}}
- Features
- Comments (0)
-
Data Sheet
A/1K-2W-PO-18” - ACI
Automation Field Components
download pdfPlease contact us if you need any other document this item may have.
You can only download Technical Document (Datasheet) on this section.
The ACI Platinum Probe Only Series features a ¼” diameter stainless steel probe with two or three, 14 or 24 inch, 22 AWG Etched Teon colored lead wires to dierentiate the dierent sensor types. The three-wire “-3W” option should be ordered if using with a 3-Wire temperature transmitter or sensor conguration on your building management system or PLC (Programmable Logic Controller). The purpose of the 3rd wire is to compensate for any external lead wire resistance that will aect your sensor output. ACI recommends the use of an 18 AWG lead wires to reduce the external lead wire resistance when using a Platinum RTD sensor. The sensors in this series are manufactured using ACI’s proven double encapsulation process to eliminate the eects of moisture on the sensors and to increase the thermal response time using our high quality, thermally conductive epoxy. The probe is designed to be used in duct and immersion applications when used with the proper length thermowell. Optional lead length, cable types and NIST Certicates are available as referenced in the ordering grid on the Product Data Sheet.
Warranty :This product is under warranty for 2 years against manufacturing and material defects from the date of invoice. The invoice for the products also stands in place of the warranty certificate, a separate document is not issued.Delivery Information :ACI branded products are imported from United States of America factory specially to order. The estimated delivery time of the products is 5 weeks. In this product group, an additional shipping and customs fee of 450EUR is charged for orders under 4,000EUR.
A/AN-D-8'-GD-NIST - ACI
Automation Field Components
10,000 Ohm Thermistor (Type III), Duct, 8', Galvanized Enclosure, NIST Cert
A/TT100-D-8'-2-4X - ACI
Automation Field Components
Transmitter w/ 100 Ohm RTD, Duct, 8', NEMA 4X Enclosure, 2-10VDC
A/TTM1K-D-4'-2-PB - ACI
Automation Field Components
Transmitter w/ 1,000 Ohm RTD (NIST Cert), Duct, 4', Plastic Enclosure, 2-10VDC Output
A/100-3W-IM-4'-4X - ACI
Automation Field Components
100 Ohm (Three Wires) RTD, Immersion, Machined Well, 4', NEMA 4X Enclosure
A/100-3W-I-6'-4X - ACI
Automation Field Components
100 Ohm (Three Wires) RTD, Immersion, Welded Well, 6', NEMA 4X Enclosure
A/TUC2-AN-0069 - ACI
Automation Field Components
10,000 Ohm Thermistor (Type II), Setpoint, LCD
A/RH2-TTM1K-R-4 - ACI
Automation Field Components
Relative Humidity, RH Outputs: 0-5, 0-10 VDC & 4-20mA (Default), Room (R), ± 2% Accuracy (NIST Cert), Transmitter w/ 1,000 Ohm RTD (NIST Cert), 4-20mA (Temp Output)
A/100-2W-O-BB - ACI
Automation Field Components
100 Ohm (Two Wires) RTD, Outside Air, NEMA 3R Enclosure