A/1K-2W-INW-4'-BB - ACI
Automation Field Components
1,000 Ohm (Two Wires) RTD, immersion, No Well, 4', NEMA 3R Enclosure
This item is temporarily out of stock.
It can be backordered right now, and we can ship it within 5 weeks.
0
120306
ACI
U.S.A.
{{CMP.TITLE}}
- Features
- Comments (0)
-
Data Sheet
A/1K-2W-INW-4'-BB - ACI
Automation Field Components
download pdfPlease contact us if you need any other document this item may have.
You can only download Technical Document (Datasheet) on this section.
The metal bell box, no well configuration has a NEMA 3R rating and is designed for wet environments. It has male 1/2 inch NPT threads and the sensing element is double encapsulated to avoid sensor failures caused by moisture infiltration. ACI also standardizes with etched Teflon lead wires and wells must be ordered separately for this part. ACI immersion temperature sensors are designed for HVAC, Building Automation Systems, and light industrial applications. Specific applications include: chillers, hot water systems, tanks, and boilers. NOTE: Welded thermowells are not intended for moving water or high pressure service. Fluid velocity and wake frequency are primary factors in well failure. Machined thermowells should be used in these types of applications.
- Negative temperature coefficient
- Double encapsulated sensor
- NEMA 3R enclosure
Warranty :This product is under warranty for 2 years against manufacturing and material defects from the date of invoice. The invoice for the products also stands in place of the warranty certificate, a separate document is not issued.Delivery Information :The stock quantity information reported in the product details is up to date. Products in stock can be shipped immediately. Products that are not in stock and whose delivery time is separately reported are shipped when the supply period is completed.
A/1K-NI-PO-4'-6'CL2P - ACI
Automation Field Components
1,000 Ohm Nickel RTD, Probe Only, 4', 6' Plenum Cable
A/50K-PO-12' - ACI
Automation Field Components
50,000 Ohm Thermistor, Probe Only, 12'
A/50K-DO-6' - ACI
Automation Field Components
50,000 Ohm Thermistor, Duct, Without Box, 6'
A/1K-NI-INW-2.5'-PB - ACI
Automation Field Components
1,000 Ohm Nickel RTD, Immersion, No Well, 2.5', Plastic Enclosure
A/TUC2-CP-0204 - ACI
Automation Field Components
10,000 Ohm Thermistor (Type II), Setpoint, w/ Override, LCD
TUCH2-CPF11EZYXX-210N6C0XX - ACI
Automation Field Components
LCD, RH2%, SET, DEG F
A/AN-R2SO-A01-C5 - ACI
Automation Field Components
10,000 Ohm Thermistor (Type III), Room (R2), w/ Setpoint: 0-100K Ohms and Override, Cool/Warm Sticker
A/RH5-1K-NI-D - ACI
Automation Field Components
Relative Humidity, RH Outputs: 0-5, 0-10 VDC & 4-20mA (Default), Duct, ± 5% Accuracy, 100 Ohm RTD (Two Wires), Euro Enclosure