A/1K-2W-I-4'-GD - ACI
Automation Field Components
1,000 Ohm (Two Wires) RTD, Immersion, Welded Well, 4', Galvanized Enclosure
This item is temporarily out of stock.
It can be backordered right now, and we can ship it within 5 weeks.
0
119541
ACI
U.S.A.
{{CMP.TITLE}}
- Features
- Comments (0)
-
Data Sheet
A/1K-2W-I-4'-GD - ACI
Automation Field Components
download pdfPlease contact us if you need any other document this item may have.
You can only download Technical Document (Datasheet) on this section.
The galvanized metal box, with well configuration has male 1/2 inch NPT threads. The sensing element is double encapsulated to avoid sensor failures caused by moisture infiltration. ACI also standardizes with etched Teflon lead wires. ACI immersion temperature sensors are designed for HVAC, Building Automation Systems, and light industrial applications. Specific applications include: chillers, hot water systems, tanks, and boilers. NOTE: Welded thermowells are not intended for moving water or high pressure service. Fluid velocity and wake frequency are primary factors in well failure. Machined thermowells should be used in these types of applications.
- Negative temperature coefficient
- Double encapsulated sensor
- Foam pad
Warranty :This product is under warranty for 2 years against manufacturing and material defects from the date of invoice. The invoice for the products also stands in place of the warranty certificate, a separate document is not issued.Delivery Information :The stock quantity information reported in the product details is up to date. Products in stock can be shipped immediately. Products that are not in stock and whose delivery time is separately reported are shipped when the supply period is completed.
A/100KS-I-6'-4X - ACI
Automation Field Components
100,000 Ohm Thermistor, Immersion, Welded Well, 6', NEMA 4X Enclosure
A/10KS-INW-2.5'-BB - ACI
Automation Field Components
10,000 Ohm Thermistor, Immersion, No Well, 2.5', NEMA 3R Enclosure
A/TT100-IM-2.5'-4-GD - ACI
Automation Field Components
Transmitter w/ 100 Ohm RTD, Immersion, Machined Well, 2.5', Galvanized Enclosure, 4-20mA Output
A/RH2-CP-R2SO-A14-G5 - ACI
Automation Field Components
Relative Humidity, RH Outputs: 0-5, 0-10 VDC & 4-20mA (Default), Room (R2), ± 2% Accuracy, 10K Ohm Thermistor (Type II), Setpoint:10K-0, Override, Blue/Red sticker
TUC2-10-F2-XX-XX-X-X-X-X - ACI
Automation Field Components
ACI Instruments
PXP7.3 - ACI
Automation Field Components
Analog Input (0-5VDC), Pressure Output (0-15PSI), Single Valve, 0.007" Bleed Orifice, (0-10V, 0-15V, 0-20mA Selectable)
A/RH2-100-2W-O - ACI
Automation Field Components
Relative Humidity, RH Outputs: 0-5, 0-10 VDC & 4-20mA (Default), Outside Air, ± 2% Accuracy, 100 Ohm RTD (Two Wires), Euro Enclosure
RN (0-2K) - ACI
Automation Field Components
Resistor Network (0 to 2000 Ohms)