A/1K-2W-A-50'-GD-NIST - ACI
Automation Field Components
1,000 Ohm (Two Wires) RTD, Copper Averaging, 50', Galvanized Enclosure, NIST Cert
This item is temporarily out of stock.
It can be backordered right now, and we can ship it within 5 weeks.
0
146388
ACI
U.S.A.
{{CMP.TITLE}}
- Features
- Comments (0)
-
Data Sheet
A/1K-2W-A-50'-GD-NIST - ACI
Automation Field Components
download pdfPlease contact us if you need any other document this item may have.
You can only download Technical Document (Datasheet) on this section.
The ACI Platinum Copper Averaging Series features a copper sensing element with Etched Teon colored lead wires to dierentiate the dierent sensor types. The three-wire “-3W” option should be ordered when using with a 3-Wire temperature transmitter or sensor conguration on your building management system or PLC (Programmable Logic Controller). The purpose of the 3rd wire is to compensate for external lead wire resistance that will aect your sensor output. ACI recommends the use of 18 AWG lead wires to reduce the external lead wire resistance when using a Platinum RTD style sensor. The sensing element includes a continuous sensing element, which covers the entire length of the copper tube. This produces a better average temperature over the entire cross sectional area of your duct or unit when compared to a single point duct sensor or multi-point averaging sensor. These sensors are hermetically sealed to ensure that moisture and other contaminants won’t aect the reliability of the sensing element. The copper averaging sensor includes a foam pad to seal the duct and dampen vibrations once installed. The sensor length should be determined by the total cross sectional area of your duct. Standard enclosure options include the “-GD” galvanized or “-PB” plastic enclosure with hinged cover. Optional NEMA/IP rated weather proof enclosures and NIST Certicates are available as referenced in the ordering grid. For higher accuracies, see the A/TTM1K (Matched) Averaging transmitter Product Data Sheet. Applications: Roof Top Units, Air Handlers, Monitoring Duct Supply/Discharge/Return/Mixed Air
Warranty :This product is under warranty for 2 years against manufacturing and material defects from the date of invoice. The invoice for the products also stands in place of the warranty certificate, a separate document is not issued.Delivery Information :ACI branded products are imported from United States of America factory specially to order. The estimated delivery time of the products is 5 weeks. In this product group, an additional shipping and customs fee of 450EUR is charged for orders under 4,000EUR.
A/AN-D-4'-PB-NIST - ACI
Automation Field Components
10,000 Ohm Thermistor (Type III), Duct, 4', Plastic Enclosure, NIST Cert
A/0.1CP-IM-4'-4X - ACI
Automation Field Components
High Accuracy 10,000 Ohm Thermistor (Type II), Immersion, Machined Well, 4', NEMA 4X Enclosure
A/3K-PO-4'-20'CL2P-HS - ACI
Automation Field Components
3,000 Ohm Thermistor, Probe Only, 4', 20' Plenum Cable, w/ Adhesive Heat Shrink
A/RH2-1K-2W-SP-010-NIST - ACI
Automation Field Components
Relative Humidity, RH Outputs: 0-10 VDC, Wall Plate 304SS, ± 2% Accuracy, 1,000 Ohm RTD (Two Wires), 0-10VDC (RH), NIST Temp/RH
ACUCT-3135R-1000:333 - ACI
Automation Field Components
Current Transformer, 1000A, High Accuracy, Split Core, 3.1" x 3.5" Aperture, 333mV Output, 2.5m Leads
TUCH2-CPF11FZTXX-316XXXXXX - ACI
Automation Field Components
LCD, RH 3%, SET, DEG F
A/TUC2-4-20MA-0027 - ACI
Automation Field Components
4-20mA Output, Setpoint, LCD
A/100-3W-S-4X - ACI
Automation Field Components
100 Ohm (Three Wires) RTD, Strap On, NEMA 4X Enclosure