A/100KS-I-2.5'-GD - ACI
Automation Field Components
100,000 Ohm Thermistor, Immersion, Welded Well, 2.5', Galvanized Enclosure
This item is temporarily out of stock.
It can be backordered right now, and we can ship it within 5 weeks.
0
119491
ACI
U.S.A.
{{CMP.TITLE}}
- Features
- Comments (0)
-
Data Sheet
A/100KS-I-2.5'-GD - ACI
Automation Field Components
download pdfPlease contact us if you need any other document this item may have.
You can only download Technical Document (Datasheet) on this section.
The ACI Thermistor Immersion Series features a ¼” diameter stainless steel probe with two, 14 inch 22 AWG Etched Teflon colored lead wires depending on the probe length ordered to differentiate the sensor types. The sensors in this series are manufactured using ACI’s proven double encapsulation process to eliminate the effects of moisture and to increase the response times using our high quality, thermally conductive epoxy. The immersion sensors include a welded thermowell “-I” version but can be ordered without the welded thermowell “-INW” version. The “INW” version includes a standard ½” NPS Male process thread to be used with an optional machined thermowell or in an existing thermowell application. Optional NEMA/IP rated enclosures and NIST certificates are available the back of the product data sheet. Applications: Chilled Water Systems, Hot Water Systems, Boilers, Pumps, Compressor, Chillers
Warranty :This product is under warranty for 2 years against manufacturing and material defects from the date of invoice. The invoice for the products also stands in place of the warranty certificate, a separate document is not issued.Delivery Information :The stock quantity information reported in the product details is up to date. Products in stock can be shipped immediately. Products that are not in stock and whose delivery time is separately reported are shipped when the supply period is completed.
A/TTM100-IM-6'-4-GD - ACI
Automation Field Components
Transmitter w/ 100 Ohm RTD (NIST Cert), Immersion, Machined Well, 6', Galvanized Enclosure, 4-20mA Output
PM10-D - ACI
Automation Field Components
PM10, Duct Mount, 0-600u g/m3, 4-20 mA and 0-10 VDC, Modbus RS-485
A/DLP-001-W-B-N-B-0-A-0P-S - ACI
Automation Field Components
Differential Low Pressure, 1 inWC, Bidirectional, No Display, 0.25% Accuracy, No Pitot Tube, 4-20mA Output, No Nist, Standard
BN2120-O - ACI
Automation Field Components
BACnet MS/TP, Modbus RTU, Relative Humidity Sensor, Outside, Euro Enclosure
A/10KS-R - ACI
Automation Field Components
10,000 Ohm Thermistor, Room (R)
A/RH3-1K-3W-R - ACI
Automation Field Components
Relative Humidity, RH Outputs: 0-5, 0-10 VDC & 4-20mA (Default), Room (R), ± 3% Accuracy, 1,000 Ohm RTD (Three Wires)
A/1K-2W-FA-24'-PB - ACI
Automation Field Components
1,000 Ohm (Two Wires) RTD, Flexible Cable Averaging, 24', Plastic Enclosure
AFP VERSION #5 - ACI
Automation Field Components
Analog Input (0-5VDC), Floating Point Output (90 sec), Version #5, (135, 180s Selectable), Relay stays on with 5% of Max/Min