A/100-3W-O-4X - ACI
Automation Field Components
100 Ohm (Three Wires) RTD, Outside Air, NEMA 4X Enclosure
This item is temporarily out of stock.
It can be backordered right now, and we can ship it within 5 weeks.
0
120043
ACI
U.S.A.
{{CMP.TITLE}}
- Features
- Comments (0)
-
Data Sheet
A/100-3W-O-4X - ACI
Automation Field Components
download pdfPlease contact us if you need any other document this item may have.
You can only download Technical Document (Datasheet) on this section.
The ACI Platinum Outside Air Series features a weather proof European style, plastic enclosure with twist off cover and water tight cord grip. The sensing element contains Etched Teflon colored lead wires to differentiate the sensor types. The three-wire “-3W” option should be ordered if using with a 3-Wire temperature transmitter or sensor configuration on your building management system or PLC (Programmable Logic Controller). The purpose of the 3rd wire is to compensate for external lead wire resistance that will affect your sensors output signal. ACI recommends the use of 18 AWG lead wires to reduce external lead wire resistance when using a Platinum RTD sensor. The sensors in this series are manufactured using ACI’s proven double encapsulation process to eliminate the effects of moisture on the sensor and to increase response time using our high quality, thermally conductive epoxy. The outdoor air sensor is a single point sensor designed to be mounted under an eave or on the North side of a building in a shaded location with the sensing tube pointed downward. Optional NEMA 4X “-4X” plastic or NEMA 3R “-BB” weatherproof Aluminum enclosures and NIST Certificates are available as referenced on the back of the product data sheet. For Applications in which the sensor must be mounted in direct sunlight, please see the Sun Shield data sheet which will allow you to order a Temperature or Temperature/Humidity Combination sensor. Applications: Outside Air Temperature Sensing, Cold Storage Facilities, High Dew Point/Condensing Environments
Warranty :This product is under warranty for 2 years against manufacturing and material defects from the date of invoice. The invoice for the products also stands in place of the warranty certificate, a separate document is not issued.Delivery Information :ACI branded products are imported from United States of America factory specially to order. The estimated delivery time of the products is 5 weeks. In this product group, an additional shipping and customs fee of 450EUR is charged for orders under 4,000EUR.
A/TT100-HT-I-4'-1-GD - ACI
Automation Field Components
Transmitter w/ 100 Ohm RTD, High Temperature Immersion, 4', Galvanized Enclosure, 1-5VDC Output
A/CSI-D-4'-GD - ACI
Automation Field Components
10,000 Ohm (CSI) Thermistor, Duct, 4', Galvanized Enclosure
A/TT100-D-12'-4-GD - ACI
Automation Field Components
Transmitter w/ 100 Ohm RTD, Duct, 12', Galvanized Enclosure, 4-20mA Output
A/AN-RS-LCD-F-A10-C5 - ACI
Automation Field Components
10,000 Ohm Thermistor (Type III), Room (R), Setpoint, LCD, 0-1K, Cool/Warm, Deg F
A/RH5-20K-D-BB - ACI
Automation Field Components
Relative Humidity, RH Outputs: 0-5, 0-10 VDC & 4-20mA (Default), Duct, ± 3% Accuracy, 20,000 Ohm Thermistor, NEMA 3R Enclosure
A/DLP-004-W-B-D-B-0-A-3P-S - ACI
Automation Field Components
Differential Low Pressure, 4 inWC, Bidirectional, LCD, 0.25% Accuracy, No Pitot Tube, 4-20mA Output, 3 Point Nist, Standard
A/TUC2-CP-0134 - ACI
Automation Field Components
10,000 Ohm Thermistor (Type II), Setpoint, w/ Override, LCD, RS232
A/WPR2-100-20 - ACI
Automation Field Components
Wet Differential Pressure, 0-10, 0-25, 0-50, 0-100 PSID (Default), 20' Cables, Outputs: 0-10 VDC (Default), 0-5 VDC, 4-20mA (Selectable)