A/100-3W-I-2.5'-PB - ACI
Automation Field Components
100 Ohm (Three Wires) RTD, Immersion, Welded Well, 2.5', Plastic Enclosure
This item is temporarily out of stock.
It can be backordered right now, and we can ship it within 5 weeks.
0
124215
ACI
U.S.A.
{{CMP.TITLE}}
- Features
- Comments (0)
-
Data Sheet
A/100-3W-I-2.5'-PB - ACI
Automation Field Components
download pdfPlease contact us if you need any other document this item may have.
You can only download Technical Document (Datasheet) on this section.
The plastic box, immersion configuration has male 1/2 inch NPT threads. The sensing element is double encapsulated to avoid sensor failures caused by moisture infiltration. ACI also standardizes with etched Teflon lead wires and 2 Part wells. Please note that the PB enclosure is rated to 203 degrees Fahrenheit. ACI immersion temperature sensors are designed for HVAC, Building Automation Systems, and light industrial applications. Specific applications include: chillers, hot water systems, tanks, and boilers. NOTE: Welded thermowells are not intended for moving water or high pressure service. Fluid velocity and wake frequency are primary factors in well failure. Machined thermowells should be used in these types of applications.
- Negative temperature coefficient
- Double encapsulated sensor
- Easy open / close latch system (no screws)
Warranty :This product is under warranty for 2 years against manufacturing and material defects from the date of invoice. The invoice for the products also stands in place of the warranty certificate, a separate document is not issued.Delivery Information :ACI branded products are imported from United States of America factory specially to order. The estimated delivery time of the products is 5 weeks. In this product group, an additional shipping and customs fee of 450EUR is charged for orders under 4,000EUR.
A/AN-RA-12'-BB - ACI
Automation Field Components
10,000 Ohm Thermistor (Type III), Rigid Probe Averaging, 12', NEMA 3R Enclosure
A/CP-R2SO-A03-B4 - ACI
Automation Field Components
10,000 Ohm Thermistor (Type II), Room (R2), Setpoint, Override, 0 to 10K Ohms, 55-85 Sticker
A/BALCO-IM-2.5”-GD - ACI
Automation Field Components
1,000 Ohm Balco RTD, Immersion, Machined Well, 2.5", Galvanized Enclosure
A/MLP2-D50-W-U-A-A-0P - ACI
Automation Field Components
Differential Pressure, Panel Mount, 0.50 inWC, UniDirectional, +/- 0.5% FSO, 4-20mA
A/TUCH2-1K NI-0041 - ACI
Automation Field Components
LCD, RH3%, SET, DEG F
A/100KS-PM - ACI
Automation Field Components
100,000 Ohm Thermistor, Pipe Mount, Brass
A/TUC2-AN-0059 - ACI
Automation Field Components
10,000 Ohm Thermistor (Type III), Setpoint, w/ Override, LCD
A/1K-3W-BP-20'CL2P - ACI
Automation Field Components
1,000 Ohm (Three Wires) RTD, Bullet Probe, 1", 20' Plenum Cable