A/100-2W-I-4'-4X - ACI
Automation Field Components
100 Ohm (Two Wires) RTD, Immersion, Welded Well, 4', NEMA 4X Enclosure
This item is temporarily out of stock.
It can be backordered right now, and we can ship it within 5 weeks.
0
119953
ACI
U.S.A.
{{CMP.TITLE}}
- Features
- Comments (0)
-
Data Sheet
A/100-2W-I-4'-4X - ACI
Automation Field Components
download pdfPlease contact us if you need any other document this item may have.
You can only download Technical Document (Datasheet) on this section.
The polycarbonate NEMA 4X, immersion configuration is designed for wet environments and adds a level of corrosion resistance. It has male 1/2 inch NPT threads and the sensing element is double encapsulated to avoid sensor failures caused by moisture infiltration. ACI also standardizes with etched Teflon lead wires and a two part well is included with this configuration. ACI immersion temperature sensors are designed for HVAC, Building Automation Systems, and light industrial applications. Specific applications include: chillers, hot water systems, tanks, and boilers. NOTE: Welded thermowells are not intended for moving water or high pressure service. Fluid velocity and wake frequency are primary factors in well failure. Machined thermowells should be used in these types of applications.
- Negative temperature coefficient
- Double encapsulated sensor
- NEMA 4X enclosure
Warranty :This product is under warranty for 2 years against manufacturing and material defects from the date of invoice. The invoice for the products also stands in place of the warranty certificate, a separate document is not issued.Delivery Information :The stock quantity information reported in the product details is up to date. Products in stock can be shipped immediately. Products that are not in stock and whose delivery time is separately reported are shipped when the supply period is completed.
A/TTM1K-INW-6'-4-BB - ACI
Automation Field Components
Transmitter w/ 1,000 Ohm RTD (NIST Cert), Immersion, No Well, 6', NEMA 3R Enclosure, 4-20mA Output
A/CP-D-18'-GD - ACI
Automation Field Components
10,000 Ohm Thermistor (Type II), Duct, 18', Galvanized Enclosure
A/TT1K-I-2.5'-2-GD - ACI
Automation Field Components
Transmitter w/ 1,000 Ohm RTD, Immersion, Welded Well, 2.5', Galvanized Enclosure, 2-10VDC Output
Q8-CLO2-2P-R-X - ACI
Automation Field Components
Chlorine Dioxide, Electrochemical, 0-2 PPM
FSIG-SLMBD-012-024GY - ACI
Automation Field Components
Deep Base for FSIGSLM500 Series (Gray)
A/MLP2-D10-W-B-A-A-0P - ACI
Automation Field Components
Differential Pressure, Panel Mount, 0.1 inWC, BiDirectional, +/ 0.5% FSO, 4-20mA
A/TT100-R2-2 - ACI
Automation Field Components
Transmitter w/ 100 Ohm RTD, Room (R2), 2-10VDC Output
FS-2A - ACI
Automation Field Components
Freeze Stat, 20' Capillary, Automatic Reset, (2) SPDT