A/100-2W-BP-20'CL2P - ACI
Automation Field Components
100 Ohm (Two Wires) RTD, Bullet Probe, 1", 20' Plenum Cable
This item is temporarily out of stock.
It can be backordered right now, and we can ship it within 5 weeks.
0
138610
ACI
U.S.A.
{{CMP.TITLE}}
- Features
- Comments (0)
-
Data Sheet
A/100-2W-BP-20'CL2P - ACI
Automation Field Components
download pdfPlease contact us if you need any other document this item may have.
You can only download Technical Document (Datasheet) on this section.
The ACI Platinum Bullet Probe Series features a one inch stainless steel probe with two or three, 24 inch, 22 AWG Etched Teflon colored lead wires to differentiate the sensor types. Note that the three-wire “-3W” option should be ordered if using with a 3-Wire temperature transmitter or sensor configuration on your building management system or PLC (Programmable Logic Controller). The purpose of the 3rd wire is to compensate for any external lead wire resistance that will impact the accuracy of your sensors output signal. For best results, ACI recommends the use of 18 AWG lead wires to reduce the external lead wire resistance when using a Platinum RTD. The sensors in this series are manufactured using ACI’s proven double encapsulation process to eliminate the effects of moisture upon the sensors and to increase the response time using our high quality, thermally conductive epoxy. The bullet style sensor is designed to be used to monitor air temperatures and should not be fully submerged in water. This series can be ordered with different wire options and NIST Certification as referenced in the Ordering Grid on the back of the product data sheet.
Applications: Roof Top Units, Air Handlers, Discharge Air/Supply/Return/Mixed Air Duct Temperature, Remote Temperature Sensing, Hydronic Systems
Warranty :This product is under warranty for 2 years against manufacturing and material defects from the date of invoice. The invoice for the products also stands in place of the warranty certificate, a separate document is not issued.Delivery Information :ACI branded products are imported from United States of America factory specially to order. The estimated delivery time of the products is 5 weeks. In this product group, an additional shipping and customs fee of 450EUR is charged for orders under 4,000EUR.
A/50K-D-18'-GD - ACI
Automation Field Components
50,000 Ohm Thermistor, Duct, 18', Galvanized Enclosure
A/100-2W-D-6'-PB - ACI
Automation Field Components
100 Ohm (Two Wires) RTD, Duct, 6', Plastic Enclosure
A/1K-3W-HT-I-4'-GD - ACI
Automation Field Components
1,000 Ohm (Three Wires) RTD, High Temperature Immersion, Welded Well, 4', Galvanized Enclosure
A/TT1K-HT-D-18'-4-GD - ACI
Automation Field Components
Transmitter w/ 1,000 Ohm RTD, High Temperature Duct, 18' 316 SS, Galvanized Enclosure, 4-20mA Output
A/CP-R2SO-A10-C5 - ACI
Automation Field Components
10,000 Ohm Thermistor (Type II), Room (R2), Setpoint, Override, 0 to 1K Ohms, Cool/Warm Sticker
A/MLP2-004-W-U-B-A-0P - ACI
Automation Field Components
Differential Pressure, Panel Mount, 0.25 inWC, UniDirectional, +/- 0.25% FSO, 4-20mA
A/TTM100-O-4-4X - ACI
Automation Field Components
Transmitter w/ 100 Ohm RTD (NIST Cert), Outside Air, NEMA 4X Enclosure, 4-20mA Output
A/RH3-O - ACI
Automation Field Components
Relative Humidity, RH Outputs: 0-5, 0-10 VDC & 4-20mA (Default), Outside Air, ± 3% Accuracy, Euro Enclosure